HPSDR Penelope Manuals

HPSDR Penelope Operation manual (14 pages)

• Identifier: id-1489115
• Brand: HPSDR
• Device: Control Unit
• Type: Operation manual, PDF
• Key Aspects: Troubleshooting Connectivity Issues, Software Installation Instructions
• UPD Date: 16.05.2026
• Source File: 1509314.pdf
• Pages: 14
• Description: User handbook for the HPSDR Penelope. The manual guides users through technical guidelines, operation, daily usage.

Key Pages and Contents:

• P E N E L O P E O P E R A T I O N W I T H P O W E R SDR

  Microphone Jumper Settings Penelope has three jumpers, just behind and below the microphone and PTT jack (#2), which need to be set in accordance with the connections chosen above (see the “gray box” in Fig 1) . These are identified on the

• P E N E L O P E O P E R A T I O N W I T H P O W E R SDR

  Note: INCREASING THE GAIN BY BAND SETTING DECREASES THE OUTPUT POWER LEVEL. SEE THE SDR1000 OPERATING MANUAL FOR ADDITIONAL INFORMATION IN RELATION TO THESE SETTINGS. AS EXPLAINED ABOVE, ALC ACTION WILL PREVENT THE PEP OUTPUT FROM EXCEEDING 0

• P E N E L O P E O P E R A T I O N W I T H P O W E R SDR

  Introduction Penelope is an exciter that provides up to 0.5W output on the 160m through 6m Amateur bands. Penelope can be used with any form of digital or analog modulation. Penelope is designed to plug into the HPSDR Atlas bus and be used in

• P E N E L O P E O P E R A T I O N W I T H P O W E R SDR

  Open Collector Outputs The DB25 connector provides seven open collector outputs that may be activated on a band-by- band and receive or transmit basis. The set up screen for this facility is on the Setup Form, General Tab - PennyCTL Sub-Tab as