IBM 3130 Manuals

IBM 3130 Planning manual (112 pages)

• Identifier: id-746716
• Brand: IBM
• Device: All in One Printer
• Type: Planning manual, PDF
• Key Aspects: User Operation Guidelines, Data Backup Instructions, Features Comparison Chart
• UPD Date: 18.08.2026
• Source File: 745962.pdf
• Pages: 112
• Description: User guide for the IBM 3130. The document details configuration and detailing setup, device safety checks, compatibility information, repair references.

Key Pages and Contents:

• 
• 
• 
• 
• 
• 
• 
• 

IBM 3130 Operation & user’s manual (194 pages)

• Identifier: id-1274617
• Brand: IBM
• Device: Printer
• Type: Operation & user’s manual, PDF
• Key Aspects: Feedback and Improvement Suggestions, Technical Support Procedures, Device Features Over Time
• UPD Date: 25.07.2026
• Source File: 1263924.pdf
• Pages: 194
• Description: Instruction and usage manual for the IBM 3130. It explains troubleshooting and dimensions and layout, repair references, maintenance guidelines.

Key Pages and Contents:

• 4. Put the cardboard under the toner cartridge handle.

  5. Remove the empty toner cartridge. Push down the toner cartridge handle, and remove the toner cartridge by pulling forward with the cardboard underneath. Place the used toner cartridge and cardboard in the empty plastic bag. 6. Install the new

• The following 3130 publications are also available:

  Ÿ IBM 3130 Advanced Function Printer: System Administration Guide, S544-5328 Ÿ IBM 3130 and 3160 Advanced Function Printer: Safety Information, S544-3978 Ÿ IBM 3130 Advanced Function Printer: Introduction and Planning Guide,

• 6. Close the paper feed module, and lock it in place.

  7. Close the front cover. 8. Look at the paper jam indicator. If a paper feed module indicator is still lit, you need to remove the fuser unit (Step 9 through Step 16 on page 7-12). 9. Open the front cover. 10. Open the paper feed module. Turn th

• 8. Loosen the thumb screw on each side of the transfer belt unit.

  Turn the thumbs screws counterclockwise to loosen, and then rotate the thumb screw brackets up and away from the transfer belt unit. 9. Remove the transfer belt unit. Lift the transfer belt unit out by the top end of the unit. Chapter