Interlogix R5812NT Manuals

1 ShatterPro 3 Glassbreak Detector ShatterPro 3 Glassbreak Detector Installation Instructions Description The ShatterPro 3 is an acoustic glassbreak detector designed to detect breaking glass from framed windows in the perimeter of a building. The detector is mounted in the building interior and uses a power supply from a 12VDC control panel. The detector is available in either a low-profile round housing or a rectangular housing that connects easily to a single-gang box. Features The detector provides the following features: • Range up to 25 feet (7.6 m) Internal spring clip allows optimized room size coverage. • Alarm memory After an alarm and until power is cycled, the alarm memory can be checked with the hand-clap test. • LED indicator Red LED provides detector test and status indication. • Tamper resistant Provides a screw that secures the cover to the base to prevent tampering. • Hand-clap test In addition to a test mode, you can test the detector by clapping your hands. • Optional tamper switch Sends a signal to the control panel when the cover is removed from the base. What You Will Need You need the following tools and parts to install the detector: • ShatterPro 3 detector including screw to secure the cover to the base • Screws and wall anchors • Flat-blade screwdriver • Phillips screwdriver • Sentrol 5709C hand-held tester Selecting a Location for the Detector The detector can be mounted on ceilings or on walls opposite or adjacent the window to be protected. See Figure 2. Use the following guidelines to determine the best location to install the detector. • Mount at least 3 feet (1 m) from glass windows being protected. • Windows must be at least 12 x 24 inches (30.5 x 61 cm) square. • Avoid locations where lined, insulating, or sound deaden- ing drapes are used. • Mount 12 inches (30.5 cm) away from wall corners. • Avoid locations where interior closed wooden shutters are used. • Locate in a suitable envionment as follows: - Temperature between 32° and 122°F (0° and 50°C) - Humidity between 10 and 90% non-condensing • Mount the detector on a stable surface up to 25 feet (7.6 m) from the farthest point on the glass surface. See Figure 2. • Avoid locations that expose the detector to possible false alarm sources such as: - Glass airlocks and vestibule areas - Kitchens - Residential car garages - Small utility rooms - Stairwells - Bathrooms - Small acoustically live rooms - Air vents Figure 1 - ShatterPro 3 Housings Figure 2 - Mounting Locations Ceiling mount Wall mount 25' (7.6 m) max. 25' (7.6 m) max.   