Intermec AC3 Manuals

Specifications Installing the AC3 Where to Find More Information Instructions AC3 8-Slot Battery Charger AC3 8-Slot Battery Charger Instructions *074017-005* P/N 074017-005 1 2 Place the battery charger on a flat, stable, and clean surface that is within 1.5 m (5 ft) of an AC power outlet. Connect the AC power supply to the power connector on the battery charger and to an AC power outlet. The Status light in each button turns on, showing that the battery charger is ready to use. To prevent fire or electric shock, do not expose the AC3 to rain or moisture. You may need additional information when working with the AC3 in a data collection system. Please visit our web site at www.intermec.com to download PDF files of our current manuals. Patent Information Product is covered by one or more of the following patents: 5,052,943; 5,195,183; 5,317,691; 5,331,580; 5,544,010; 5,644,471. There may be other U.S. and foreign patents pending. Button (8 places) Status light (8 places) Power connector Electrical rating: x 12 V, 8.3 A Requires Intermec AC power supply v100 to 240 V, 50-60 Hz Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2010 Intermec Technologies Corporation. All rights reserved.

Specifi cations Installing the AC3 Where to Find More Information Instructions AC3 8-Slot Battery Charger AC3 8-Slot Battery Charger Instructions *074017-003* P/N 074017-003 1 2 Place the battery charger on a fl at, stable, and clean surface that is within 1.5 m (5 ft) of an AC power outlet. Connect the AC power supply to the power connector on the battery charger and to an AC power outlet. The Status light in each button turns on, showing that the battery charger is ready to use. To prevent fi re or electric shock, do not expose the AC3 to rain or moisture. You may need additional information when working with the AC3 in a data collection system. Please visit our web site at www.intermec.com to download PDF fi les of our current manuals. To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. Patent Information Product is covered by one or more of the following patents: 5,052,943; 5,195,183; 5,317,691; 5,331,580; 5,544,010; 5,644,471. There may be other U.S. and foreign patents pending. Button (8 places) Status light (8 places) Power connector Electrical rating: x 12V, 8.4A Requires Intermec AC power supply (Model 851-064-002) v100 to 240 VAC, 50-60 Hz Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2006 Intermec Technologies Corporation. All rights reserved.

AC1, AC2, AC3, AD1, and AD2 Compliance Insert For Users in the United States and Canada AC1 AC2, AD1, and AD2 AC3 The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. FCC Digital Emissions Compliance Intermec Models AC1, AC3, and AD1 have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the radio or television receiving antenna. • Increase the separation between the computer equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. • Consult the dealer or an experienced radio television technician for help. Intermec Models AC2 and AD2 have been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. Canadian Digital Apparatus Compliance This Class B digital apparatus (AC1, AC3, and AD1) meets all requirements of the Canadian Interference-Causing Equipment Regulations. This Class A digital apparatus (AC2 and AD2) meets all requirements of the Canadian Interference-Causing Equipment Regulations. Conformité aux normes canadiennes sur les appareils numériques Cet appareil numérique de la classe B (AC1, AC3, et AD1) respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada. Cet appareil numérique de la classe A (AC2 et AD2) respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada. Caution: This marking indicates that the user should read all included documentation before use. Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse. Caution: For use with Intermec battery pack Model AB1G only. For power supply, use Intermec model 073573. No user- serviceable parts. Attention: Pour utilisation suelement avec bloc-batterie Intermec modèle AB1G. Pour la source d’alimentation, utilisez Intermec modèle 073573. Il ne contient aucune pièce réparable par l’utilisateur. Caution: For use with Intermec Models CK30, CK31, and CK31NI and battery pack Model AB1G only. For power supply use Intermec Model 073573. No user-serviceable parts. Attention: Pour utilisation avec Intermec modèles CK30, CK31, and CK31NI. Pour la source d’alimentation, utilisez Intermec modèle 073573. Il ne contient aucune pièce réparable par l’utilisateur. Caution: For use with Intermec battery pack Model AB1G only. For power supply, use Intermec model 851-064-002. No user-serviceable parts. Attention: Pour utilisation suelement avec bloc-batterie Intermec modèle AB1G. Pour la source d’alimentation, utilisez Intermec modèle 851-064-002. Il ne contient aucune pièce réparable par l’utilisateur.