IOTA ETS Manuals

IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed, including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. CAUTION – This fixture provides more than one power supply output source. To reduce the risk of electrical shock, disconnect both normal and emergency sources by turning off the A.C. branch circuit. 2. CAUTION – This is a sealed unit. Replace the entire unit when necessary. 3. DO NOT USE OUTDOORS. The ETS is for use with grounded, UL Listed, indoor fixtures. Not for use in heated air outlets or hazardous locations. 4. The ETS requires an unswitched A.C. power source of either 120 or 277 volts. Properly cap the unused A.C. lead. 5. Do not mount near gas or electric heaters. 6. The ETS should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel. 7. The ETS is compatible with all A.C. magnetic and electronic ballasts. 8. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition. 9. Do not use this equipment for other than intended use. 10. Install in accordance with the National Electrical Code and local regulations. 11. Installation and servicing should be performed by qualified personnel. 12. Lighting fixture manufacturers, electricians, and end-users need to ensure product system compatibility before final installation. SAVE THESE INSTRUCTIONS ETS EmERgENCY TRANSFER SWITCH SERIES A INSTRUCTION MANUAL