James Walker KlickFix Manuals

Installation and Operating Guide for KlickFix ® Please read these instructions before starting to fit the seal Note: there are four options for the pump shaft sleeve that must be taken into account when following the fitting sequence. 1a. Shaft sleeve supplied with the cartridge to fit directly on the existing shaft or sleeve of pump. 1b. New shaft sleeve supplied to replace existing shaft sleeve. 1c. Existing shaft sleeve supplied with new coating applied by James Walker. 1d. No shaft sleeve supplied with KlickFix; either because existing sleeve on pump shaft meets James Walker criteria, or customer has manufactured own sleeve. EN DE IT NL ES F KlickFix is factory assembled. KlickFix ist werkseitig montiert. KlickFix viene assemblato in fabbrica. KlickFix wordt geheel. geassembleerd geleverd. KlickFix viene montado de fábrica. Le KlickFix est assemblé en usine. Your James Walker KlickFix is factory-assembled ready for installation. Deployment Sleeve Flange E-Clips Guide Pin Outer Centralising Bush Continuous Groove for Deployment

James Walker KlickFix ® On-site Refurbishment Guide for Check all items in your James ® Walker KlickFix Component Replacement Kit. Wipe components with a clean cloth before installation. ! ! ! ! PTFE Sealing Element preformed and factory fitted with ‘O’ rings Reusable Former (supplied with first kit) Positioning Clips (E-Clips) Rear Centralising Bush Kit contents EN DE IT NL ES Check kit & wipe items. Controllare il kit e pulire i particolari Controleer het onderdelenpakket en wrijf de onderdelen schoon. Compruebe el kit y limpie las partes. Vérifier le kit et essuyer les pièces Prüfen Sie das Kit & wischen Sie die Teile ab F