K-Team Koa-PicoITX Manuals
K-Team Koa-PicoITX Operation & user’s manual (24 pages)
- Identifier: id-626976
- Brand: K-Team
- Device: Motherboard
- Type: Operation & user’s manual, PDF
- Key Aspects: Troubleshooting Section, Instructions for Connecting Additional Modules, Error Code Reference
- UPD Date: 01.06.2026
- Source File: 621708.pdf
- Pages: 24
- Description: Official operating instructions for the K-Team Koa-PicoITX. This manual covers safety guidelines, power requirements, reset instructions.
Key Pages and Contents:
-
Koa-PicoITX User Manual rev 1.0
18 4.2 On another computer You must have an ix86 compatible computer with the operating system Linux. We do not provide any cross-compiler. You can install the Ubuntu operating system (http://www.ubuntu.com/) in a dual boot configuration, or install the VirtualBox vir -
Koa-PicoITX User Manual rev 1.0
5 1.3 How to use this handbook This handbook introduces the Koa-PicoITX extension and how to use it. For a quick start, jump to section 2.3, "First Start-up". If this handbook does not answer one of the problems you are confronted with, please consult the K-Team -
Koa-PicoITX User Manual rev 1.0
15 4. PROGRAMMING Knowledge needed: - C programming - command line compilation (Makefile) You have two choices for programming: - directly on the robot and PicoITX (fastest, nothing more to be installed) - on another computer (better for remote or if the robot is no -
Koa-PicoITX User Manual rev 1.0
21 - create the link to the start-up level 2: sudo ln -s /etc/init.d/via_gpio /etc/rc2.d/S99via_gpio - unpack in the created software directory the driver file gpio- driver_XYZ.tar.bz2: mkdir ~/software cd ~/software tar -xjf gpio-driver_XYZ.tar.bz2 - in the director