KHIND FZ100 Manuals

model / 型号 FZ100/ FZ251/ FZ508/ FZ708 P/N: 40-50995-00 Chest Freezer / 冷冻柜 / Peti Dingin Sejuk Instruction Manual / 说明指示书 / Buku Panduan Please read this manual carefully before operating this product. Keep this manual handy for further reference. 请在使用此产品前,详读此说明书。并将之收藏以作日后参考。 Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah untuk rujukan masa depan. Important / 重要/Mustahak This manual is also available online. www.khind.com.my 2 Safety and warning information 1. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its lifespan will be properly informed on appliance use and safety. 2. For the safety of life and property keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission. Children and vulnerable people safety 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 2. Cleaning and user maintenance shall not be made by children unless they are supervised. 3. Keep all packaging well away from children. There is risk of suffocation. 4. If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent playing children to suffer electric shock or to close themselves into it. 5. If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lack unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child. Safety Precaution Information ! 3 Safety Precaution Information ! General Safety WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. WARNING! Do not damaged the refrigerant circuit. WARNING! Do not use other electrical appliances (such as ice cream makers) inside of food storage compartment of the appliances, unless they are of the type recommended by the manufacturer. a. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. b. The refrigerant isobutane (R600a/R290) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of enviromental compatibility, which is nevertheless flammable. c. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged. - Avoid open flames and sources of ignition. - Throughly ventilate the room in which the appliances is situated. d. It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and or electric shock. e. This appliance is intended to be used in household and similar applications such as - Staff kitchen areas in shops, offices and other working enviroments; - Farm houses and by clients in hotels, motels and other residential type environments; - Bed and breakfast type environments; - Catering and similar non-retail applications. WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged. WARNING! Do not locate multiple portable socket outlet or portable power supplies at the rear of the appliance. WARNING! Any electrical components (plug, power, compressor and etc.) must be replaced by a certified service agent or qualified service personnel. WARNING! If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. - Power cord must not be lengthened. - Make sure that the power plug is not squashed or damaged power plug may overheat and cause a fire. - make sure that you can come to the mains plug of the appliance. Do not pull the mains cable. - If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. - This appliance is heavy. Care should be taken when moving it. - Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns. - Avoid prolonged exposure of the appliance to direct sunlight. ! ! ! ! ! ! ! ! Daily Use 1. Do not put hot on the plastic parts in the appliance. 2. Frozen food must not be re-frozen once it has been thawed out. 3. Store pre-packed frozen food in accordance with the frozen food manufactures instructions. 4. Appliances manufacturer’s storage recommendations should be strictly adhered to. Refer to relevant instructions. 5. Do not place carbonated of fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. 6. Ice lollies can cause frost burns if consumed straight from the appliance. Care and Cleaning 1. Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket. 2. Do not clean the appliance with metal objects. 3. Do not use sharp objects to remove frost from the appliance. Use a plastic scraper. 4. Regularly examine the drain in the chest freezer for defrosted water. If necessary, clean the drain. 4 Safety Precaution Information ! 5 Installation Important! For electrical connection carefully follow the instructions given in specific paragraphs. 1. Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. 2. It is advisable to wait at least 4 hours before connecting the appliance to allow the oil to flow back in the compressor. 3. Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation. 4. Wherever possible, the spacer of the products should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn. The appliance must not be located to radiators or cookers. Make sure that the mains plug is accessible after the installation of the appliance. Service Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person. This product must be serviced by an authorized service center and only genuine spare parts must be used. Energy Saving 1. Don’t put hot food in the appliance. 2. Don’t pack food close together as this prevents air circulating. 3. Make sure food don’t touch back of the compartments. 4. If electricity goes off, don’t open the door 5. Don’t open the doors frequently. 6. Don’t keep the doors open for too long time. 7. Don’t set the thermostat on exceeding cold temperatures. 8. Some accessories, such as drawers, can be removed to get larger storage volume and lower energy consumption. Environment Protection This appliance does not contain gases which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the appliance regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used on this appliance marked by the symbol are recyclable. The symbol on the product or on its packaging indicates that this product may not be treated as household- waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. Packaging Materials The materials with the symbol are recyclable. Dispose the packaging in a suitable collection containers to recycle it. Disposal of the Appliance 1. Disconnect the mains plug from the mains socket. 2. Cut off the mains cable and discard it. For hygenic reasons the appliance interior, including interior accessories, should be cleaned regularly. Caution! The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning, switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts. The appliance must be dry before it is placed back into service. Important! Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice from orange peel, butyric acid, cleanser that contain acetic acid. a. Do not allow such substance to come into contact the appliance parts. b. Do not use any abrasive cleaners c. Remove the food from the freezer. Store them in a cool place, well covered. d. Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse. e. Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning, wipe with fresh water and rub dry. f. Accumulation of dust condenser increases energy consumption. For this reason, carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. g. After everything is dry, place appliance back into service. Safety Precaution Information ! Cleaning ! Step 1 Pick out the screw 2 on the freezer door by tools, and pick out the handle base with lock 1 handle cover 3 Step 2 Fix the handle base 1 on the door by driving 4 pieces of screws picked. FZ708 Install door external handle ( if external is present ) 6 Parts identification 1. External Handle (except FZ100) 2. Recessed handle 3. LED Lamp (except FZ100) 4. Basket 5. Indicator Light 6. Thermostat Knob 7. Drain Hole 8. Wheel 9. Thermostat Control Panel 10. Power Cord *Pictures are for illustration purpose only. ( FZ100, FZ251 Mechanical type ) ( FZ508 Mechanical type ) ( FZ708 Electronic type) Model Voltage Rated Power Input (Watt) Rated Lamp Power Input Rated Current (Ampere) Net Capacity Refrigerant Condenser Compressor Fan Handle LED Lamp Wheel Temperature Temperature Control Door Quantity Door Lock & Key Sliding Glass Basket Quantity Net Weight Gross Weight Product Dimension (LxWxH) Box Dimension (LxWxH) FZ100 220-240V~ 50Hz 100W - 0.95A 100L R600a/36g Hidden No Recessed No 2 T<-18˚C Mechanical 1 No No 1 24kg 27kg 545 x 545 x 845mm 570 x 575 x 885mm FZ251 220-240V~ 50Hz 140W 1W 1.35A 251L R600a/56g Hidden No External Yes 2 T<-18˚C Mechanical 1 Yes No 1 34kg 38kg 954 x 616 x 845mm 990 x 640 x 885mm FZ508 220-240V~ 50Hz 230W 2W 1.8A 508L R290/65g Hidden No External Yes 4 T<-18˚C Mechanical 2 Yes No 1 60kg 68kg 1640 x 700 x 865mm 1680 x 748 x 890mm FZ708 220-240V~ 50Hz 305W 2W 2.25A 708L R290/83g Hidden No External Yes 4 T<-18˚C Electronic 2 Yes No 1 72kg 82kg 1905 x 820 x 865mm 1956 x 888 x 890mm Specifications *Specifications are subject to change without prior notice. 7 Installation FZ251 & FZ508 Install door external handle ( if external is present ) Note : If the lock ring failed to hold the lock when installing handle, please unscrew the round head screw 5 on the back of door and adjust the position of door upper and lower. Then drive the screw to fix the handle. Step 1 Take out 4 screw 1 and handle base 2 from accessory bag. Then fix the handle base 2 with door by 4 screw 1 Step 3 Screw lock catch 4 on the freezer cabinet by another 2 screw. Step 2 Insert handle cover 3 in the handle base 2 until a click. 1 5 1 3 4 5 6 7 8 2 9 10