Kohler OnCue Plus Manuals

Kohler OnCue Plus Quick start manual (20 pages)

• Identifier: id-1327324
• Brand: Kohler
• Device: Portable Generator
• Type: Quick start manual, PDF
• Key Aspects: Troubleshooting Information, Warranty and Service Information
• UPD Date: 30.04.2026
• Source File: 1400435.pdf
• Pages: 20
• Description: Complete instruction guide for the Kohler OnCue Plus. The document details configuration and detailing setup, replacement parts, firmware installation.

Key Pages and Contents:

• Find your generator, tap the

  “ACTIVATE YOUR GENERATOR” link and follow the instructions. Step 4: Activate Your Generator Now that your generator is added, there’s only one thing left: activate your Generator. Then you’re ready to use OnCue® Plus. First tap the menu icon in the top left. 5

• Have a question or

  want to set up a service appointment? Your personal KOHLER dealer is just a tap away. Your KOHLER dealer will set up this page during the OnCue® Plus installation. 14

• These pages let you

  view over 20 generator parameters that offer detailed information such as firmware version number, serial number and power output. 12

• On the Controls page,

  you can perform additional exercises remotely without affecting your weekly scheduled exercise. Turn on/off specific electronic appliances or rooms (available only when paired with a Programmable Interface Module [PIM]). And watch your generator automatically manage yo

Kohler OnCue Plus Installation instructions manual (16 pages)

• Identifier: id-1711716
• Brand: Kohler
• Device: Adapter
• Type: Installation instructions manual, PDF
• Key Aspects: Checklists for New Users, Field Test Results
• UPD Date: 03.07.2026
• Source File: 1725493.pdf
• Pages: 16
• Description: Detailed product documentation for the Kohler OnCue Plus. The document provides guidance on safety and system configuration, technical guidelines, technical assistance, operational safety.

Key Pages and Contents:

• Test the connection (Macr computer).

  15.1 Click on the Appler icon. 15.2 Click on System Preferences. 15.3 Click on the Network icon. 15.4 Click on the Ethernet connected icon. Verify that Ethernet is in the connected state, indicated by a green dot. 15.5 Change Configure IPv4 to

• Wireless AP Assembly Drawing GM81385, Sheet 1 of 3

• Green On = System On

  Green Off = System Off Amber Blinking = WLAN Activity LAN Off = No Ethernet On = Connection Established Blinking = Sending, Receiving WLAN (AP Mode) Off = WLAN Disabled On = WLAN Enabled Blinking = WLAN Activity WLAN (Cl

• The wireless access point hardware must be installed

  inside the generator set enclosure. See Figure 5, Figure 6, or Figure 7 for the recommended location on your generator set model. The ambient temperature must be warmer than 0_C (32_F) at the time of installat