Konftel PA interface box Manuals
1 pdf manual(s) Konftel PA interface box for free download (Document Types: Manual )
Konftel PA interface box Manual [PDF] (2 pages)
- Identifier: id-1711380
- Brand: Konftel
- Device: PA interface box Adapter
- Type: PDF
- Key Aspects: Unpacking and Inspection Guidelines, FAQ Section for Common Queries, Standard Operating Procedures
- UPD Date: 03.04.2026
- Source File: 1725829.pdf
- Pages: 2
- Description: Full technical guide for the Konftel PA interface box.
Pages Preview:
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Conference phones for every situation Connecting a PA interface box to the Konftel 300IP ENGLISH Activating and deactivating of internal microphone and internal speakers The internal microphone and speakers are turned off by default when the PA box is connected. Press MENU and select SETTINGS > BASIC > PA (5,1,7). Select INTERNAL MIC or INTERNAL SPKR and press OK to switch between ON (shaded box) and OFF. To ensure maximum audio quality, do not use internal and external microphones/speakers connected via the PA interface box at the same time. Adjusting microphone volume from PA system PA monitor can be used to adjust the microphone level from an external microphone mixer. Make a call. Press MENU and select PA > MONITOR. Adjust the microphone level from the mixer so that this level value on the display screen is around 10–12 when speaking in a normal tone of voice. Adjusting PA calibration manually If needed it is possible to calibrate the full duplex performance. The calibration value can be set to AUTO or be adjusted manually in steps from 0 to 5 where 0 is the highest grade of duplex. • Increase the calibration if the remote party experiences disturbing echoes. • Decrease the calibration if the remote party experiences low duplex, i.e. your voice is muted or clipped when the other party is speaking. The position of the PA system’s microphones and speakers and the amplifier’s settings may affect full duplex performance. Make a call. Press MENU and select PA > CALIBRATION. AUTO is the default setting and is recommended in most cases. The figure shown in brackets is the measured calibration value. Select different levels and compare the audio quality to achieve your preferred setting. NB. You must ask the person you are calling to assess the effect of the adjustments you make. Settings www.konftel.com Head office in Sweden: Konftel AB, Box 268, SE -901 06 Umeå, Sweden Phone: +46 90 70 64 89, Fax: +46 90 13 14 35, E-mail: [email protected] 110061-61-001 rev 1b