Kramer WP-789T Manuals

WP-789T Quick Start P/N: 2 9 0 0 - 3 0 1 0 9 1 QS Rev: 2 Scan for full manual WP-789T Quick Start Guide This guide helps you install and use your WP-789T for the first time. Go to www.kramerav.com/downloads/WP-789T to download the latest user manual and check if firmware upgrades are available. Step 1: Check what’s in the box WP-789T HDMI 4K Wall-Plate Line Transmitter 1 Quick start guide Installation accessories 1 Power adapter (with open DC head) and cord Frame (or frame set) and faceplate Step 2: Get to know your WP-789T # Feature Function 1 HDMI™ IN Connector Connects to an HDMI source. 2 STATUS LED LED Color HDBT Connected Source Detected Acceptor Detected Blue Yes Yes Yes Green Yes Yes No Yellow Yes No N/A White Device is powered with no detected connections. STATUS LED is off only when the device does not receive power. 3 RS-232 (G, Rx, Tx, PROG) 4-pin Terminal Block Connector Connects to an RS-232 port (see Step 5: Configure the WP-789T). 4 IR (Rx, Tx-1, Tx-2), 3-pin Terminal Block Connectors Connect to an external IR infrared emitter (see Step 5: Configure the WP-789T). 5 Ring Tongue Terminal Grounding Screw Connect to grounding wire (optional). 6 HDBT OUT RJ-45 Connector Connect to the HDBT IN connector on a receiver (for example, TP-789R). 7 Power Supply 2-pin Terminal Block Connector Connect to a power supply (if required). Connect GND to GND, +12V to +12V.

P/N: 2900-301206 Rev 1 www.kramerAV.com USER MANUAL MODEL: WP-789T, TP-789R, TP-789Rxr HDMI Line Transmitters and Receivers over HDBaseT