Lang FCOFL-AT Manuals

Lang Manufacturing 10 Sunnen Drive St. Louis, MO 63143 Part #: 2M-W731 Phone: 314-678-6315 Fax: 314-781-2714 Rev B www.langworld.com June 05, 2012 Installation, Operation, and Maintenance Instructions with Troubleshooting Electric Full Size Economy Convection Oven Models: FCOFL-AT (Lower) FCOF-AT (Upper) 2 THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. POST IN A PROMINENT LOCATION INSTRUCTIONS TO BE FOLLOWED IN THE EVENT USER SMELLS GAS. THIS INFORMATION SHALL BE OBTAINED BY CONSULTING YOUR LOCAL GAS SUPPLIER. AS A MINIMUM, TURN OFF THE GAS AND CALL YOUR GAS COMPANY AND YOUR AUTHORIZED SERVICE AGENT. EVACUATE ALL PERSONNEL FROM THE AREA. WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT. Model #: Purchased From: Serial #: Location: Date Purchased: Date Installed: Purchase Order #: For Service, Call: 3 TABLE OF CONTENTS CHAPTER PAGE 1. TABLE OF CONTENTS..........................................................................3 2. READ FIRST ..........................................................................................4 3. EQUIPMENT DESCRIPTION .................................................................6 4. UNPACKING ..........................................................................................7 5. INSTALLATION ......................................................................................8 6. INITIAL START-UP.................................................................................9 7. OPERATION...........................................................................................10 8. MAINTENANCE & CLEANING ...............................................................11 9. WIRING DIAGRAM.................................................................................16 – 17 10. ILLUSTRATED PARTS BREAK DOWN .................................................18 - 29