Lectrosonics HH Manuals

Lectrosonics Standard Test & Alignment Procedure Part number(s): HH Hardware version(s): 17424B (audio) & 17423B (radio) Firmware version(s): 0.93 Part number(s): HHAU Hardware version(s): 17424B (audio) & 17423B (radio) Firmware version(s): ? Part number(s): HH/E01 Hardware version(s): 17424B (audio) & 17423B (radio) Firmware version(s): ? Part number(s): HH/E02 Hardware version(s): 17424B (audio) & 17423B (radio) Firmware version(s): ? Common name: hand held transmitter Author(s): Rodney Wildhagen & Cruz Garcia Test procedure version: 01.00 Date: 04 Oct 2011 Initial setup: Audio Board only  Audio board with PIC18F67J11 µC IC Step Measurement name& description Measurement result (Typ) Test Segment 10 of 60 Program µC IC and Current draw Audio board only CAUTION When reprograming already tested devices, be sure to set device programmer GUI to preserve all settings (block, limiter settings, etc.). In Microchip MPLAB this is done by selecting Programmer > Settings > Program > Preserve EEPROM on program > Apply > OK. Failure to do so will result in loss of all assigned variable values such as frequency block, limiter setting, indicator settings, etc. Note This need only be performed at the factory the first time the DUT is powered up, when µC IC is replaced, or when a firmware update is desired and confirmed to be appropriate. Apply +3.0VDC, 300mA current limit in at battery contact J8 (J9 is circuit common) Note In order to program DUT, JU1 must be jumpered or the power button must be pressed during the entire programming process. Remove JU1 jumper after programming. Program µC IC with programming cable connected at J6 (ICSP port) Remove ICSP cable Measure current draw 50 to 500 mA (117) Note The goal here is only to ensure the audio board powers up and is not burning up with fever

HH Handheld Transmitter Digital Hybrid Wireless® Technology US Patent 7.225.135 Rio Rancho, NM, USA www.lectrosonics.com Fill in for your records: Serial Number: Purchase Date: INSTRUCTION MANUAL

Quick Start Guide Fill in for your records: Serial Number: Purchase Date: This guide is intended to assist with initial setup and operation of your Lectrosonics product. For a detailed user manual, down- load the most current version at: www.lectrosonics.com/manuals Handheld Transmitter HH 06 March 2013 U.S. Patent 7,225,135