LevelOne FPS-9023 Manuals

LevelOne FPS-9023 Operation & user’s manual (163 pages)

• Identifier: id-964085
• Brand: LevelOne
• Device: LevelOne FPS-9023 Print Server
• Type: Operation & user’s manual, PDF
• Key Aspects: Detailed Features Explanation, Emergency Procedures
• UPD Date: 24.03.2026
• Source File: 1194421.pdf
• Pages: 163
• Description: Detailed product documentation for the LevelOne FPS-9023. It contains information on troubleshooting guides, safety, interface navigation.

Key Pages and Contents:

• 8.4.9 Save Settings

  You can click the “Save Settings” to save the settings and restart the system.

• 9.5 Other Commands

  9.5.1 ipconfig “ipconfig” command is used to quickly get the IP settings (IP, subnet mask, default gateway) of the printer server: admin# ipconfig IP_ADDR=192.168.2.2 SUBNET_MASK=255.255.255.0 DEFAULT_GATEWAY=192.168.2.254 9.5.2 reboot “reboot” command is use

• You can enable/disable the SMB protocol from here. If SMB is

  enabled, enter the “SMB Group Name” to specify the SMB group that this printer server belongs to. All PC should join the same group before they can use this printer server by SMB protocol. Pass Job when Error Occurred

LevelOne FPS-9023 Operation & user’s manual (160 pages)

• Identifier: id-532642
• Brand: LevelOne
• Device: LevelOne FPS-9023 Printer
• Type: Operation & user’s manual, PDF
• Key Aspects: Installation Checklist, Emergency Procedures
• UPD Date: 08.05.2026
• Source File: 519453.pdf
• Pages: 160
• Description: Installation instructions for the LevelOne FPS-9023. This guide explains the features and device overview, adjustment procedures, repair references.

Key Pages and Contents:

• Step3. The new remote print port is displayed as follows.

  In order to use the remote printing function, you will have to proceed with normal Add Printer procedure and select your printer port as the newly added remote printer port.

• 1.4 Network Printing Environment

  Common network environment are classified as following: Windows Peer-to-Peer Network The client’s PTPP driver will use TCP/IP protoco l to print through printer server. Windows 2000 Network Network printing function will become available after PTPP driv er is

• search and configure printer servers on other subnets across network

  segments. You must use Remote Ports Utility described in the next section to manage remote (across network segments) printer servers. Select the network ports in the “Available Ports” list and click “>” to add ports. If

• NetWare Network (see below)