Lightware UBEX Series Manuals

Matrix Application Mode UBEX-MMU-X200 UBEX-PRO20-HDMI-F100 UBEX-PRO20-HDMI-F110 UBEX-PRO20-HDMI-R100 2xMM-2xDUO UBEX-PRO20-HDMI-R100 2xMM-QUAD UBEX-PRO20-HDMI-R100 2xSM-2xDUO UBEX-PRO20-HDMI-R100 2xSM-QUAD UBEX-PRO20-HDMI-R100 2xSM-BiDi-DUO User’s Manual AV Over IP Multimedia Extender  UBEX series – Matrix Application Mode – User's Manual 2 Important Safety Instructions Class I apparatus construction. This equipment must be used with a mains power system with a protective earth connection. The third (earth) pin is a safety feature, do not bypass or disable it. The equipment should be operated only from the power source indicated on the product. To disconnect the equipment safely from power, remove the power cord from the rear of the equipment, or from the power source. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. There are no user-serviceable parts inside of the unit. Removal of the cover will expose dangerous voltages. To avoid personal injury, do not remove the cover. Do not operate the unit without the cover installed. The appliance must be safely connected to multimedia systems. Follow instructions described in this manual. Ventilation For the correct ventilation and to avoid overheating ensure enough free space around the appliance. Do not cover the appliance, let the ventilation holes free and never block or bypass the ventilators (if any). WARNING To prevent injury, the apparatus is recommended to securely attach to the floor/wall or mount in accordance with the installation instructions. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus. CAUTION AVIS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR  Waste Electrical & Electronic Equipment WEEE This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Caution: Laser product CLASS 1 LASER PRODUCT Common Safety Symbols Symbol Description Alternating current Protective conductor terminal  Caution, possibility of electric shock Caution Laser radiation     UBEX series – Matrix Application Mode – User's Manual 3 Symbol Legend The following symbols and markings are used in the document: WARNING!
Safety-related information which is highly recommended to read and keep in every case! ATTENTION!
Useful information to perform a successful procedure; it is recommended to read. DIFFERENCE:
Feature or function that is available with a specific firmware/hardware version or product variant. INFO:
A notice which may contain additional information. Procedure can be successful without reading it. DEFINITION:
The short description of a feature or a function. TIPS AND TRICKS:
Ideas which you may have not known yet but can be useful. Navigation Buttons Go back to the previous page. If you clicked on a link previously, you can go back to the source page by clicking the button. Navigate to the Table of Contents. Step back one page. Step forward to the next page.     Document Information All presented functions refer to the indicated products. The descriptions have been made during testing these functions in accordance with the indicated Hardware/Firmware/Software environment: Item Version Lightware Device Controller (LDC) software 1.34.0b2 Lightware Device Updater V2 (LDU2) software 2.0.0b22 Firmware package UBEX-PRO20-HDMI-F100 1.4.1 UBEX-PRO20-HDMI-F110 1.4.1 UBEX-PRO20-HDMI-R100 series 1.4.1 UBEX-MMU-X200 1.2.1 Hardware UBEX-PRO20-HDMI-F100 1.2 UBEX-PRO20-HDMI-F110 1.3 UBEX-PRO20-HDMI-R100 series 1.3 UBEX-MMU-X200 1.0 Document revision: 1.6 Release date: 04-12-2019 Editor: Tamas Forgacs About Printing Lightware Visual Engineering supports green technologies and eco-friend mentality. Thus, this document is made for digital usage primarily. If you need to print out few pages for any reason, follow the recommended printing settings: ▪ Page size: A4 ▪ Output size: Fit to page or Match page size ▪ Orientation: Landscape TIPS AND TRICKS:
Thanks to the size of the original page, a border around the content (grey on the second picture below) makes possible to organize the pages better. After punching the printed pages, they can be placed easily into a ring folder. 1 2 3     UBEX series – Matrix Application Mode – User's Manual 4 Page Legend The side and bottom color of the pages indicates the related application mode of the device. This document is about the Matrix application mode only. The user's manual of the UBEX Extender mode can be downloaded from the following link: https://lightware.com/pub/media/lightware/filedownloader/file/ User-Manual/UBEX_Extender_UsersManual_v1.6.pdf Sample page for Extender mode Sample page for Matrix mode Device Legend The UBEX F-series endpoint devices can be ordered with various colored front panel but the transmitter is always red, the receiver is always yellow, and the transceiver is always white in this manual for the sake of simplicity. Transmitter (TX) Receiver (RX) Transceiver (TRX) For the available colors of the front panel please contact [email protected]. Information Searching Optimization - Hashtag (#) Keywords in the Document This user's manual contains keywords with hashtag (#) to help you to find the relevant information as quick as possible. The format of the keywords is the following: # The usage of the keywords: use the Search function (Ctrl+F / Cmd+F) of your PDF reader application, type the # (hashtag) character and the wished keyword. The #new special keyword indicates a new feature/function that has just appeared in the latest firmware or software version. Example #dhcp This keyword is placed at the DHCP (dynamic IP address) setting in the front panel operation, the Lightware Device Controller (LDC) and the LW3 programmer's reference section. See the list of all hashtag keywords of the document in the Hashtag Keyword List section, and it is highlighted with claret in the table of contents of the document. Information Searching Optimization - The Quick Link Collection An assorted link collection can be found at the end of this user's manual. The Quick Link Collection helps to find the related section for your current activity. The collection is grouped by topic category and within that is in alphabetical order. The section of the quick link collection is highlighted with claret in the table of contents of the document. Sample page of the Quick Link Collection   