Magtek eDynamo Manuals

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT, mDynamo Secure Card Reader Authenticator .NET/PCL Programmer’s Reference (Windows/Windows Phone) October 2016 Manual Part Number: D99875723-50 REGISTERED TO ISO 9001:2008

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com DYNAMAG, DYNAMAX, EDYNAMO, UDYNAMO, ADYNAMO, MDYNAMO, TDYNAMO, DYNAWAVE SCRA Devices MTNET Demo Guide January 2019 Manual Part Number: D998200163-12 REGISTERED TO ISO 9001:2015

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com Dynamag, DynaMAX, eDynamo, mDynamo, tDynamo, DynaWave, and iDynamo 6 Secure Card Reader Authenticators Programmer’s Reference (Java and Java Applet) November 2019 Manual Part Number: D99875724-101 REGISTERED TO ISO 9001:2015

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com Dynamag, DynaMAX, and eDynamo Secure Card Reader Authenticator Programmer’s Reference (WCF) November 2015 Manual Part Number: D9982000105-10 REGISTERED TO ISO 9001:2008

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com eDynamo Secure Card Reader Authenticator Installation and Operation Manual October 2018 Manual Part Number: D998200110-23 REGISTERED TO ISO 9001:2015

MagTek I 1710 Apollo Court I Seal Beach, CA 90740 I Phone: (562) 546-6400 I Technical Support: (888) 624-8350 www.magtek.com eDynamo Secure Card Reader Authenticator Programmer’s Manual (COMMANDS) February 2019 Manual Part Number: D998200115-17 REGISTERED TO ISO 9001:2015

Connection • Micro-USB B: configured to appear as a vendor-defined HID device, no custom drivers necessary. • Wireless: configured to appear as a GATT device. Supports personal area network using standard 2.4GHz frequency space • Wireless Range: Minimum 33 ft. (10 m) in line-of-sight conditions. Mounting eDynamo offers versatile mounting options and can be mounted or hand held. It requires no wire management or hole drilling. Optional Docking Station With the optional docking station for surface-mounted applications, simply press eDynamo onto any smooth, clean surface. The micro-suction base offers the optimal level of stickiness so cardholders can swipe with confidence without requiring any mounting hardware or alterations to the mounting surface. In addition, the docking station includes recessed panels to apply your own branding. Connect the USB cable to eDynamo. Place eDynamo on the base. Then connect the top case over eDynamo connecting to the base. Tested Operating Systems iOS 7.1 and above, Android 4.4.2 and above, USB: Win 7, Win 8.1, Win 10 CAUTION: MagTek recommends charging the batteries on arrival AND charging the batteries at least every 6 months. STORAGE TEMPERATURE: 32°F to 113°F (0°C to 45°C) eDynamo gives users the flexibility needed to securely accept a variety of payment card technologies. Whether accepting a traditional magnetic stripe card or a contact EMV card, eDynamo gives merchants the ability to connect via USB or Wireless, delivering one reader for mobile or stationary needs. This design leads to saving the user money on a single, low-cost, yet highly secure device. Major Components Power and Charging Power: via micro-USB (utilize its wired USB interface and power to operate while connected to a PC or tablet-based POS system where a USB Host and power are available) or via the rechargeable battery. Charging: Fully charge eDynamo before first use (for 3 hours or until the LED is solid green). Fully charge eDynamo within 6 months of shelf storage. Charging via industry standard USB cables. Requires USB port for charging before use. Subsequent charging requires just a couple of hours for a full charge. Allows over 1,000 card swipes between charges. Device Modes • Airplane Mode: ship mode, will not advertise/communicate over Wireless. • Reset Mode: to reset to Airplane Mode, hold the pushbutton for 5 to 10 seconds. • Discoverable Mode: press the pushbutton briefly to get to this waiting/ ready state. Device is not connected to USB but advertises over Wireless. • Pairing Mode: to pair the reader via Wireless, hold the pushbutton for two seconds, the LED will flash three times, release the pushbutton. The device will advertise over Wireless and the Wireless Status LED will flash once every two seconds. Find and pair on the terminal. • Connected Mode: connected to a USB host, or paired to Wireless host, the device does not advertise and is not discoverable. • Tamper Mode: self-test has failed or a tamper has been detected, the device must be returned to manufacturer for a factory reset. eDynamo - PN 21079809 EMV/Secure Card Reader Authenticator Quick Installation Guide Setup and Installation MagTek­­® Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com

eDynamo EMV/Secure Card Reader Authenticator Quick Installation Guide www.magtek.com eDynamo gives users the flexibility needed to securely accept a variety of payment card technologies. Whether accepting a traditional magnetic stripe card or a contact EMV card, eDynamo gives merchants the ability to connect via USB or Wireless, delivering one reader for mobile or stationary needs. This design leads to saving the user money on a single, low-cost, yet highly secure device. Product Description