Manrose HYPER150 Manuals

PUB0110 iss:09 03/17 Flexible Duct Internal Grille External Grille The Shower Fan screwed to the joist Model: Hyper150 Order Code: FAN0085 This 150mm diameter in-line duct axial fan is suitable for domestic ventilation applications which require high working pressures with low relative noise. Integral ball bearings mean a long lifetime of service and a quieter operation. These fans are generally mounted in the ceiling cavity to exhaust air from interior vents to the outside. The compact design, low profile, ease of mounting and IP rating to IPX2 ensure a straight forward installation, which enables additional ducting to be added to this system, while still maintaining high levels of extraction. Thank you for selecting our Manrose 150mm In-Line Extractor Fan. Please read all instructions before commencing installation. MANROSE HYPER150 IN-LINE EXTRACTOR FAN CLASSIC SERIES INSTALLATION INSTRUCTIONS We reserve the right to change specification without prior warning Manrose is proudly distributed by Simx Limited PO Box 14 347, Panmure, Auckland, NZ. Technical Support (09) 259 1662­ e: [email protected] | www.simx.co.nz | www.manrose.com.au TYPICAL INSTALLATION Specifications Motor: All metal aluminium die cast with metal impeller, outer rotor, shaded pole motor Voltage: 220-240 V ~ 50Hz Wattage: 27W Noise Level: 38dB(A)@3m Maximum pressure: 120 Pa Fan Performance: 394m3/hr (zero pressure) IP Rating: IPX2 Compliance: AS/NZS60335-2.80:2004 Suitable for extracting air from bathrooms, kitchen and laundries and bar/restaurant areas. Ideal for heat transfer systems or to supply fresh air to stale enclosed areas.