Measurement Computing BTH-1208LS-OEM Manuals

BTH-1208LS-OEM Wireless Multifunction DAQ Device Document Revision 5A December 2014 © Copyright 2014 User's Guide HM BTH-1208LS-OEM Trademark and Copyright Information Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement Computing logo are either trademarks or registered trademarks of Measurement Computing Corporation. Refer to the Copyrights & Trademarks section on mccdaq.com/legal for more information about Measurement Computing trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. © 2014 Measurement Computing Corporation. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, by photocopying, recording, or otherwise without the prior written permission of Measurement Computing Corporation. Notice Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for use in life support systems and/or devices without prior written consent from Measurement Computing Corporation. Life support devices/systems are devices or systems that, a) are intended for surgical implantation into the body, or b) support or sustain life and whose failure to perform can be reasonably expected to result in injury. Measurement Computing Corporation products are not designed with the components required, and are not subject to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of people. 3 Table of Contents Preface About this User's Guide ....................................................................................................................... 5 What you will learn from this user's guide ......................................................................................................... 5 Conventions in this user's guide ......................................................................................................................... 5 Where to find more information ......................................................................................................................... 5 Chapter 1 Introducing the BTH-1208LS-OEM ...................................................................................................... 6 Functional block diagram ................................................................................................................................... 7 Chapter 2 Installing a BTH-1208LS-OEM .............................................................................................................. 8 Unpacking........................................................................................................................................................... 8 Downloading the software .................................................................................................................................. 8 Pairing with the host device ................................................................................................................................ 8 Installing the hardware in USB mode (Windows only) ...................................................................................... 9 Configuring Bluetooth settings ........................................................................................................................... 9 Calibrating the hardware..................................................................................................................................... 9 Chapter 3 Functional Details ............................................................................................................................... 10 Analog input acquisition modes ....................................................................................................................... 10 Software paced mode .......................................................................................................................................................10 Hardware paced mode......................................................................................................................................................10 BURSTIO ........................................................................................................................................................................11 Board components ............................................................................................................................................ 11 USB connector .................................................................................................................................................................11 Power/pairing button ........................................................................................................................................................12 LEDs ................................................................................................................................................................................12 Connector J1 ....................................................................................................................................................................13 Connector J2 ....................................................................................................................................................................13 Connector J3 ....................................................................................................................................................................13 Signal connections ............................................................................................................................................ 14 Analog input ....................................................................................................................................................................14 Analog output ..................................................................................................................................................................15 External clock input .........................................................................................................................................................15 Digital I/O ........................................................................................................................................................................15 External pull-up/pull-down capability .............................................................................................................................15 Bulkhead signals ..............................................................................................................................................................16 Trigger input ....................................................................................................................................................................16 Counter input ...................................................................................................................................................................16 Ground .............................................................................................................................................................................17 Power output ....................................................................................................................................................................17 Mechanical drawing ......................................................................................................................................... 17 Chapter 4 Specifications ...................................................................................................................................... 18 Analog input ..................................................................................................................................................... 18 Accuracy ..........................................................................................................................................................................19 Noise performance ...........................................................................................................................................................20 Analog output ................................................................................................................................................... 20 Digital input/output........................................................................................................................................... 21 External trigger ................................................................................................................................................. 22 External clock input .......................................................................................................................................... 22 BTH-1208LS-OEM User's Guide 4 Counter ............................................................................................................................................................. 23 Memory ............................................................................................................................................................ 23 Microcontroller ................................................................................................................................................. 23 Power ................................................................................................................................................................ 24 Bluetooth .......................................................................................................................................................... 24 USB .................................................................................................................................................................. 24 Environmental .................................................................................................................................................. 24 Mechanical ....................................................................................................................................................... 25 Signal connectors .............................................................................................................................................. 25 Analog signals (J1) ..........................................................................................................................................................25 Digital signals (J2) ...........................................................................................................................................................25 Bulkhead signals (J3) .......................................................................................................................................................26