Minolta DiMAGE DiMAGE Scan Multi PRO Manuals
Minolta DiMAGE DiMAGE Scan Multi PRO Instruction manual (129 pages)
- Identifier: id-570103
- Brand: Minolta
- Device: Scanner
- Type: Instruction manual, PDF
- Key Aspects: Support and Resource Information, Features vs. Competitors, Additional Resources for Users
- UPD Date: 18.06.2026
- Source File: 557607.pdf
- Pages: 129
- Description: Instruction guide for the Minolta DiMAGE DiMAGE Scan Multi PRO. The documentation includes technical guidelines, dimensions and layout, service procedures.
Key Pages and Contents:
-
DiMAGE Scan Multi PRO 79
Amount: If you adjust the slider to increase (to the right), Pixels increasing the level of contrast will become larger. If you increase the value too much, Pixelation (the Pixels image becoming noticeably rough) will occur. Normally, we recommend 150 to 200% for highly proc -
Multi-format attachment (sold separately, HA-P3)
Purchasing the Multi-format attachment, sold separately, will enable you to deal with a wider range of films such as a 16mm film. Multi-format attachment (HS-P1) The following contents should be included in this package. If there is an article of infe -
DiMAGE Scan Multi PRO 17
USING THE SCSI INTERFACE 4. Turn the SCSI terminator switch (Dip switch 1) to OFF. • An external terminator is not necessary with this scanner. 5. Plug the SCSI cable from the next device into the open port on the back of the scanner. IF THERE ARE OTHER DEVICES IN YOUR SCS -
DiMAGE Scan Multi PRO 23
INSTALLING THE SOFTWARE — MACINTOSH Please remove or disable any antivirus system extensions before launching this installer. These extensions may conflict with the operation of this installer. Replace or re-enable them when installation is complete. Hold the shift key dow