Mobotix S26 Flex Manuals

Camera Manual S26 Flex 20.100.101-01_EN_07/2019 all-guides com

Mx-S26 32.839-002_EN_09/2017 Quick Install S26 Flex Accessories S26 S26 Standard Delivery M.6 1.1 1.13 M.3 M.2 M.1 1.10 1.9 1.8 1.5 1.6 1.12 M.7 1.2 1.11 1.4 1.3 1.7 M.5 M.4 M.8 M.10 M.9 Standard Delivery Item Count Part Name 1.1 1 Camera housing (with base plate) 1.2 1 Lens B016 (installed) Standard Delivery Item Count Part Name 1.3 1 Dome (installed) 1.4 1 Housing cover for S26 (installed) 1.5 3 Stainless steel Allen screw with flat head M4x8 mm (installed) 1.6 1 Sealing ring (installed) 1.7 1 Sealing plug blue, small (sensor modules, USB, mounted) 1.8 1 Sealing plug blue, large (Ethernet patch cable, mounted) 1.9 1 Cable lock with bayonet catch (Ethernet patch cable, mounted) 1.10 1 Eight-wire plug, white (Ethernet installation cable, microphone, speaker) 1.11 1 MicroSD card pre-installed (SDXC) 1.12 1 Threaded plug for SD card, blue (mounted) 1.13 1 Ethernet patch cable, 50 cm/19.7 in with sealing Mounting Supplies Item Count Part Name M.1 4 Stainless steel washers dia. 4.3 mm M.2 4 Dowels 6 mm M.3 4 Stainless steel wood screws with hex head 4x40 mm M.4 2 Cable plug 5 to 7 mm, white (Ethernet installation cable) M.5 1 Cable plug 3 to 5 mm, white (Ethernet installation cable) M.6 1 Allen wrench 2.5 mm M.7 1 Lens wrench (lens, dome) M.8 1 Module wrench (sensor module, glass cover/filter insert) M.9 1 Cable tie (Ethernet installation cable, microphone, speaker) M.10 1 Screwdriver (terminals) Hemispheric 6MP Camera with Day or Night Image Sensor for Concealed Installation MOBOTIX 6MP camera for concealed installation in indoor and outdoor applications, available as S26 Flex with lens B016 and Day or Night image sensor. More information: www.mobotix.com > Products > Outdoor Cameras > Flex S26 Connections and Initial Operation of the S26 You can find detailed information on the installation and connections of the S26 in the S15 Camera Manual for the S15M (PDF, available on www.mobotix.com > Support > Manuals). Please note that the boot options of this camera have changed compared to its predecessor (see «Boot Options of the S26») and the camera only has one key ("L"). Regarding the rest of the initial operation of the S26, please see the S15 Camera Manual in Chapter 3, «Initial Operation». Microphone Speaker Ethernet installation cable, LSA terminal block Key L LEDs Housing cover Base plate Ethernet patch cable USB L Lens B016 MiniUSB Additional cable or net- work installation cable MOBOTIX patch cable or additional cable Cam1 In special situations, you can attach an external sensor module to the S26. In this case, you need to attach the external sensor module to the "Cam1" connector of the camera; then follow the instructions for attaching sensor modules to the S16. After configuring the external sensor module, the inte- grated image sensor of the S26 will be deactivated. Mounting the Camera 1. Installation Using the Base Plate Attach the camera using the supplied or other screws by affixing the base plate to a suitable material 1 (see «Drilling Template» on page 2). Note that you can also install the S26 behind faceplates of up to 6.4 mm/0.25 in thickness using stud bolts 2 (see «Drilling Template» on page 2). 2. Installation With AudioMount (Accessory) Using the self-adhesive AudioMount 3 , you can install the S26 as an intercom solution. This is explained in the product documentation «Quick Install AudioMount» (suitable drilling template is supplied). 2 3 1 Notes: • Due to the missing MxBus connection, this camera model cannot be installed as a fully-fledged door station with connected MxBus modules and corresponding remote stations. • For the realization of an intercom solution, switching inputs and outputs can be used via a USB-connected MX-232-IO-Box. In this case, the process- ing of the switching input signals (e. g., from a bell) and the switching outputs (e. g., for a door release) is carried out internally via the available standard mechanisms (e. g., events and network messages). Autoconfiguration and other door station functions are not available. Inserting/Exchanging the SD Card All camera models can use the integrated MicroSD card (SDHC) to record video data. In order to exchange the MicroSD card, please proceed as outlined in the following instruction. For information on reliable SD cards, please see the MOBOTIX website www.mobotix.com > Support > MxMedia Library > Planning in the document MicroSD Card Whitelist for MOBOTIX Cameras. When replacing the SD card, make sure that recording has been deactivated in the browser (Admin Menu > Storage > Storage on External File Server / Flash Device; activate recording again in the same dialog). 1. Remove the SD card Loosen the threaded plug at the top of the housing (using a suitable coin, for example) and remove the plug. Using tweezers, gently press the SD card into the slot (as indicated by the arrow) until you hear a click. The card is protruding slightly and can be easily removed with the tweezers. 2. Insert the SD card Again using tweezers, insert the SD card as shown (contacts facing forward) into the card slot. Make sure that you hear a click again when pushing the card into the slot. The card is now locked and can be used. Insert the threaded plug again and tighten it using the coin. AudioMount with integrated microphone and speaker (can, e.g., be used as an intercom solution) Boot Options of the S26 By default, the camera starts as DHCP client and automatically tries to get an IP address from a DHCP server. To start the camera in a mode different from the default mode, you can activate the boot menu of the camera. 1. Preparing the Camera • Disconnect the camera's power supply. • Reconnect the power supply of the camera. 2. Activating the Boot Menu The red LED lights up 5 to 10 seconds after establishing the power supply and will stay on for 10 seconds. Briefly press the key L indicated by the red circle in the figure. The camera enters the boot menu, ready for selecting one of the boot options. The LED now flashes once and repeats the flash signal after pausing for one second (the number of flashes indicates the current boot option). To go to the next boot option, briefly press the key again (< 1 sec). After the last boot option, the camera returns to the first option (LED flashes once). LED flashes Boot Option Meaning Audio Confirmation* 1 x Not used Not available on this camera model. — 2 x Factory Defaults Starts the camera with factory defaults (factory default IP address, users and passwords will not be reset). Boing 3 x Automatic IP Address Starts the camera as DHCP client and tries to obtain an IP address from a DHCP server. If a DHCP server cannot be found or no IP address can be obtained, the camera starts with its factory default address. Boing Boing 4 x Recovery System Starts the camera with the recovery system, e.g., in order to recover from a failed update of the camera software. Alarm Sound *Only on cameras with audio option and installed speaker. 3. Selecting a Boot Option Press the key longer (> 2 sec) into the hole. The camera confirms the selec- tion by flashing rapidly three times. After 20 sec, the camera will confirm the selection by playing a sound according to the table above. If nothing is selected, the camera will resume its normal boot process after a certain time. L • Mx6 system platform with H.264 support • Includes MxAnalytics video analysis tools out-of-the-box • Recording on internal MicroSD card (SDXC, SDHC installed) • Audio connectors for microphone and speaker integrated • Sensor for temperature integrated • Weatherproof and robust camera housing (IP66, IK07) Click! Click!

S26 Flex Quick Install 20.032.839-06_EN_07/2020 S26 Standard Delivery M.6 1.1 1.13 M.3 M.2 M.1 1.10 1.9 1.8 1.5 1.6 1.12 M.7 1.2 1.11 1.4 1.3 1.7 M.5 M.4 M.8 M.10 M.9 Standard Delivery Item Count Part Name 1.1 1 Camera housing (with base plate) 1.2 1 Lens B016 (installed) 1.3 1 Dome (installed) 1.4 1 Housing cover for S26 (installed) Standard Delivery Item Count Part Name 1.5 3 Stainless steel Allen screw with flat head M4x8 mm (installed) 1.6 1 Sealing ring (installed) 1.7 1 Sealing plug blue, small (sensor modules, USB, mounted) 1.8 1 Sealing plug blue, large (Ethernet patch cable, mounted) 1.9 1 Cable lock with bayonet catch (Ethernet patch cable, mounted) 1.10 1 Eight-wire plug, white (Ethernet installation cable, microphone, speaker, MxBus wires for variant Mx-S26B) 1.11 1 MicroSD card pre-installed (SDXC) 1.12 1 Threaded plug for SD card, blue (mounted) 1.13 1 Ethernet patch cable, 50 cm/19.7 in with sealing Mounting Supplies Item Count Part Name M.1 4 Stainless steel washers dia. 4.3 mm M.2 4 Dowels 6 mm M.3 4 Stainless steel wood screws with hex head 4x40 mm M.4 2 Cable plug 5 to 7 mm, white (Ethernet installation cable) M.5 1 Cable plug 3 to 5 mm, white (Ethernet installation cable) M.6 1 Allen wrench 2.5 mm M.7 1 Lens wrench (lens, dome) M.8 1 Module wrench (sensor module, glass cover/filter insert) M.9 1 Cable tie (Ethernet installation cable, microphone, speaker, MxBus wires for variant Mx-S26B) M.10 1 Screwdriver (terminals) Connections and Initial Operation of the S26 You can find detailed information on the installation and connections of the S26 in the S26 Camera Manual (PDF, available on www.mobotix.com > Support > Download Center > Documentation > Manuals). Please note that the boot options of this camera have changed compared to its predecessor (see «Boot Options of the S26») and the camera only has one key ("L"). Regarding the rest of the initial operation of the S26, please see the S26 Camera Manual in Chapter 3, «Initial Operation». The first access follows the procedure described in the same manual in the section «Initial Operation of the Camera». All other tasks require access to the camera’s user interface in the browser. Enter the camera’s IP address into the address bar of the browser (user "admin", password "meinsm"; password must be changed upon first login – camera software V5.1.x and higher). Ethernet installation cable, LSA terminal block Microphone MxBus Speaker Key L LEDs Housing cover Base plate Ethernet patch cable USB L Lens B016 MiniUSB Additional cable or net- work installation cable MOBOTIX patch cable or additional cable Cam1 In special situations, you can attach an external sensor module to the S26. In this case, you need to attach the external sensor module to the "Cam1" con- nector of the camera; then follow the instructions for attaching sensor modules to the S16. After configuring the external sensor module, the integrated image sensor of the S26 will be deactivated. Mounting the Camera 1. Installation Using the Base Plate Attach the camera using the supplied or other screws by affixing the base plate to a suitable material 1 (see «Drilling Template» on page 2). Note that you can also install the S26 behind faceplates of up to 6.4 mm/0.25 in thickness using stud bolts 2 (see «Drilling Template» on page 2). 2. Installation With AudioMount (Accessory) Using the self-adhesive AudioMount 3 , you can install the Mx-S26B* as a door station. This is explained in the product documentation «Quick Install AudioMount» (suitable drilling template is supplied). *Variant Mx-S26B supports MOBOTIX MxBus modules, door station func- tionality available with camera software V5.2.x and higher) 2 3 1 To configure the door station, please follow the procedure in the S26 Camera Manual (PDF, available on www.mobotix.com > Support > Download Center > Documentation > Manuals). Note on Variant Mx-S26A: This variant does not support MxBus modules and cannot be used as a full-fledged door station. To implement an intercom solution based on an Mx-S26A, you can use the signal inputs and outputs of an MX-232-IO-Box connected to the camera via USB. In this case, the camera uses its standard mechanisms (e.g., events and network messages) to process the input signals (e.g., from a door bell) and to control the signal outputs (e.g., of a door opener). Please note that the auto configuration and other door station functions are not available in this case. Inserting/Exchanging the SD Card All camera models can use the integrated MicroSD card (SDHC) to record video data. In order to exchange the MicroSD card, please proceed as outlined in the following instruction. For information on reliable SD cards, please see the MOBOTIX website www.mobotix.com > Support > Download Center > Documentation > White Lists in the document MicroSD Card Whitelist for MOBOTIX Cameras. When replacing the SD card, make sure that recording has been deactivated in the browser (Admin Menu > Storage > Storage on External File Server / Flash Device; activate recording again in the same dialog). 1. Remove the SD card Loosen the threaded plug at the top of the housing (using a suitable coin, for example) and remove the plug. Using tweezers, gently press the SD card into the slot (as indicated by the arrow) until you hear a click. The card is protruding slightly and can be easily removed with the tweezers. 2. Insert the SD card Again using tweezers, insert the SD card as shown (contacts facing forward) into the card slot. Make sure that you hear a click again when pushing the card into the slot. The card is now locked and can be used. Insert the threaded plug again and tighten it using the coin. Click! Click! Boot Options of the S26 By default, the camera starts as DHCP client and automatically tries to get an IP address from a DHCP server. To start the camera in a mode different from the default mode, you can activate the boot menu of the camera. 1. Preparing the Camera • Disconnect the camera's power supply. • Reconnect the power supply of the camera. 2. Activating the Boot Menu The red LED lights up 5 to 10 seconds after establishing the power supply and will stay on for 10 seconds. Briefly press the key L indicated by the red circle in the figure. The camera enters the boot menu, ready for selecting one of the boot options. The LED now flashes once and repeats the flash signal after pausing for one second (the number of flashes indicates the current boot option). To go to the next boot option, briefly press the key again (< 1 sec). After the last boot option, the camera returns to the first option (LED flashes once). LED flashes Boot Option Meaning Audio Confirma- tion* 1 x Auto Config- uration Starts the auto configuration in order to operate this camera as a door station (variant Mx-S26B only, camera software V5.2.x and higher). Phone ringing 2 x Factory Defaults Starts the camera with factory defaults (factory default IP address, users and passwords will not be reset). Boing 3 x Automatic IP Address Starts the camera as DHCP client and tries to obtain an IP address from a DHCP server. If a DHCP server cannot be found or no IP address can be obtained, the camera starts with its factory default address. Boing Boing 4 x Recovery System Starts the camera with the recovery sys- tem, e.g., in order to recover from a failed update of the camera software. Alarm Sound *Only on cameras with audio option and installed speaker. 3. Selecting a Boot Option Press the key longer (> 2 sec). The camera confirms the selection by flashing rapidly three times. After 20 sec, the camera will confirm the selection by playing a sound according to the table above. If nothing is selected, the camera will resume its normal boot process after a certain time. L Accessories Mx-S26A/B* with AudioMount (e.g., as door station/ intercom solution) AudioMount with inte- grated microphone and speaker *Variant Mx-S26B supports MOBOTIX MxBus modules, door station func- tionality available with camera software V5.2.x and higher)