MULTILANE ML4062-MCB-LPBK Manuals

MULTILANE ML4062-MCB-LPBK Technical reference (9 pages)

• Identifier: id-2313511
• Brand: MULTILANE
• Device: Motherboard
• Type: Technical reference, PDF
• Key Aspects: Firmware Update Process, Device Configuration Guide, Limitations of the Device
• UPD Date: 18.04.2026
• Source File: 1974106.pdf
• Pages: 9
• Description: Operation guide for the MULTILANE ML4062-MCB-LPBK. The documentation includes maintenance guidelines, troubleshooting, setup validation.

Key Pages and Contents:

• Accessing in bootloader mode allows the user to reprogram the microcontroller, this is done as

  described below: 1. Connect a jumper on P15 (Boot_Run) near the microcontroller. 2. Connect a USB cable between the PC and Board. 3. Power up the board. 4. LEDs (D2, D4) star

• MSA Compliant QSFP-DD MCB

• 3.2 Module Power-Up

  The modules are supplied using one of two powering options:  From the on-board regulator that uses the main host supply (P5V) as input  From an external 3.3V source through connector (U319), by following the steps below:  Place a jumper between LDOS_OFF

• This can be done through connectors J7, J18, J8 and J19, for modules A and B, as shown in the

  image below. Figure 6: Connectors Pin Access 4. ML4062-MCB-LPBK Software The ML4062-MCB-LPBK is accessible and controlled through application software. This software is MSA compliant and pr