Murata GRM Manuals

Murata GRM Manual  (26 pages)

• Identifier: id-1232221
• Brand: Murata
• Device: Heat Pump
• Type: Manual , PDF
• Key Aspects: User Rights and Responsibilities, Customization Options
• UPD Date: 09.04.2026
• Source File: 926052.pdf
• Pages: 26
• Description: Complete operating guide for the Murata GRM. The manual contains instructions for device calibration, security instructions, wiring setup, assembly reference.

Key Pages and Contents:

• 4-3. Correction of Soldered Portion

  When sudden heat is applied to the capacitor, distortion caused by the large temperature difference occurs internally, and can be the cause of cracks. Capacitors also tend to be affected by mechanical and thermal stress depending

• 0.6 to 0.8

  a (0.3 to 0.5) b, b' 0.3 c, c' 2.0 to 2.6 d 1.3 to 1.8 e 1.4 to 1.6 f 0.5 p Table 5 LLM Series Reflow Soldering Method b=(c-e)/2, b'=(d-f)/2 [Land for LLA Series] [Land for LLM Series] c' a e b c p f b' d Solder Resist Solder Resist p c a b Chip

• 5. Optimum Solder Amount for Flow Soldering

  5-1. The top of the solder fillet should be lower than the thickness of the components. If the solder amount is excessive, the risk of cracking is higher during board bending or any other stressful condition. [Example of Temperature Conditions fo

• 1. The performance of a capacitor may be affected by the

  conditions during transportation. 1-1. The capacitors shall be protected against excessive temperature, humidity, and mechanical force during transportation. (1) Climatic condition �������������