Nice HSSOC Manuals

1 – SPECIAL WARNINGS Install the product in a location difficult to reach, to avoid inadvertent dam- age. 2 – INSTALLATION AND ELECTRICAL CONNECTION CAUTION! – All electrical connections must be made with the unit disconnect- ed from the mains power supply. 01. Open the box (fig. 1); 02. Prepare the hole for the routing of cables: detach the plastic part as shown in fig. 2. Caution! – Do not dispose of the plastic element removed; it is used subse- quently to activate the tamper-proof system if required (point 03); 03. Before mounting HSSOC on the wall, if required, the tamper-proof system can be activated; this means that if the box is opened, detached from the wall and/or broken into, the siren transmits the event to the control unit for activation of an acoustic and visual signal. To activate this function, proceed as shown in fig. 3. 04. Route the electric cables through the hole and fix HSSOC to the wall by means of the screws and plugs supplied (fig. 4); 05. Before making the electrical cable connections, the required operating mode must be selected (fig. 5): a) with alarm block: with the alarm active, when the set number of alarms is exceeded, the alarm signal is shut off; b) without alarm block: with the alarm active, the alarm signal is continuous; 06. Make the electrical connections on HSSOC: - buffer battery (not supplied): see fig. 6, the lamp flashes (if the lamp is per- manently lit, this means that the battery is not inserted correctly); - power supply from control unit: see fig. 7; To connect the control unit power supply, refer to the relative instruction manual. HSSOC confirms correct connection by emitting 2 beeps and the lamp stops flashing; 07. Close the box (fig. 8); HSSOC emits a beep to confirm correct closure; if this does not occur, check closure. HSSOC performs a self-programming function when activated/deactivated for the first time on the control unit (see control unit instruction manual). 3 – BUFFER BATTERY REPLACEMENT 01. Set the control unit to “TEST” mode (see control unit instruction manual); 02. Open the HSSOC box (fig. 1); 03. Disconnect the buffer battery, replace with a new battery of the same type and then reconnect, observing the specified polarity (fig. 5): the control unit emits a beep to confirm successful learning; 04. Close the box (fig. 9); HSSOC emits a beep to confirm correct closure; if this does not occur, check closure. 4 - TECHNICAL SPECIFICATIONS WARNINGS: • All technical specifications stated in this section refer to an ambient temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to apply modifications to products at any time when deemed necessary, maintaining the same intended use and functionality. I Type: outdoor siren with cable connection to control unit and built-in flashing light I Power supply: 12 Vdc + 2.2 Ah buffer battery with estimated autonomy of 4 days I Acoustic alarm: 116 dB at 1 m I Visual alarm: lamp 5 W, 12 V flashing I Autonomy: 4 days with buffer battery I Absorbed current: on standby maximum 5 mA - 2 A in alarm status I Protections: internal battery anti-inversion device I Timers: max. 3 minutes for each flashing light – count control of 3 or 5 alarms I Radio reception/transmission: digital bidirectional communication, in dual band frequency (433 and 868 MHz) with quartz control; devices pre-encoded in the factory and managed in self-learning mode I Radio range: 100 m in open field free of disturbance or approx. 20 m inside buildings. I Insulation: class II I Operating temperature: from -20 °C to +55 °C I Use in class III environments I Assembly: vertical, wall-mounted. I Dimensions (mm): 207 x 203 x 73 mm I Weight: 1.560 kg ENGLISH EN - Installation instructions: abridged manual; for further information see instruction manual for the control unit IT - Istruzioni per l’installazione: manuale ridotto, per ulteriori informazioni vedere manuale istruzioni della centrale FR - Instructions pour l’installation : guide réduit, pour plus de détails, voir le guide d’instructions de la logique de commande ES - Instrucciones para la instalación: manual sintético, para más informaciones véase el manual de instrucciones de la central DE - Anleitungen für die Installation: Eingeschränktes Handbuch – für weitere Informationen siehe Gebrauchsanleitung der Steuerung PL - Instrukcje montażu: skrócona instrukcja obsługi; aby uzyskać więcej informacji przeczytaj instrukcję obsługi centrali NL - instructies voor de installatie: beknopte handleiding, zie voor meer informatie de instructiehandleiding van de besturingseenheid Nice HSSOC Home security outdoor siren 0682

EN - Instructions and warnings for installation and use Abridged manual; for further information see instruction manual for the control unit IT - Istruzioni ed avvertenze per l’installazione e l’uso Manuale ridotto, per ulteriori informazioni vedere manuale istruzioni della centrale FR - Instructions et avertissements pour l’installation et l’utilisatio Guide réduit, pour plus de détails, voir le guide d’instructions de la logique de commande ES - Instrucciones y advertencias para la instalación y el uso Manual sintético, para más informaciones véase el manual de instrucciones de la central DE - Installierungs-und Gebrauchsanleitungen und Hinweise Eingeschränktes Handbuch – für weitere Informationen siehe Gebrauchsanleitung der Steuerung PL - Instrukcje i ostrzeżenia do instalacji i użytkowania Skrócona instrukcja obsługi; aby uzyskać więcej informacji przeczytaj instrukcję obsługi centrali NL - Aanwijzingen en aanbevelingen voor installatie en gebruik Beknopte handleiding, zie voor meer informatie de instructiehandleiding van de besturingseenheid Home security outdoor siren Nice HSSOC