Novar EP/2-EA Manuals

Novar EP/2-EA Installation instructions manual (6 pages)

• Identifier: id-1149067
• Brand: Novar
• Device: Adapter
• Type: Installation instructions manual, PDF
• Key Aspects: User Access Control Settings, Initial Setup Steps, Features Comparison Chart
• UPD Date: 18.07.2026
• Source File: 1009312.pdf
• Pages: 6
• Description: Complete service manual for the Novar EP/2-EA. It explains maintenance and product maintenance, specifications, device calibration, usage tips.

Key Pages and Contents:

• Use the hex wrench to tighten the retaining screw in the

  mounting post on the right side to secure the EP/2 electronics assembly to the baseplate. � The left retaining screw cannot be used with the Ethernet Adapter installed. Checking Installation To check the installation, monito

• PRINTED IN U.S.A.

• Align the adapter’s three mounting holes with the three mounting

  posts (shown in Figure 1) and carefully push the adapter toward the baseplate. 5 Insert the three 1-inch screws included with the mounting kit (see Figure 2), making certain that they are aligned correctly, and tight

• NOTE! The knockout hole on the left side of the EP/2 baseplate

  will be blocked by the Ethernet Adapter. If wires run through this hole, they must be rerouted. Do not route them under the adapter. The Ethernet Adapter must sit firmly against the baseplate to ensure a proper connection. Use the follow