Omron E5CN-U - Manuals

Basic-type Digital Temperature Controller E5CN/E5CN-U 1 Basic-type Digital Temperature Controller E5CN/E5CN-U (48 x 48 mm) New 48 x 48-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function. • Indication Accuracy Thermocouple input: ±0.3% of PV (previous models: ±0.5%) Pt input: ±0.2% of PV (previous models: ±0.5%) Analog input: ±0.2% FS (previous models: ±0.5%) • New E5CN-U Models (Plug-in Models) with analog inputs and current outputs. • A PV/SV-status display function can be set to alternate between displaying the PV or SV and the status of the Temperature Controller (auto/manual, RUN/STOP and alarms). • Preventive maintenance for relays using a Control Output ON/OFF Counter. Main I/O Functions 48 × 48-mm E5CN 48 × 48-mm E5CN-U Refer to Safety Precautions on page 18. Event Inputs • None • Two Sensor Inputs • Universal thermocouple/Pt inputs (Models with temperature inputs) • Analog current/voltage inputs (Models with analog inputs) Indication Accuracy • Thermocouple input: ±0.3% of PV • Pt input: ±0.2% of PV • Analog input: ±0.2% FS Sampling Period and control update • 250 ms Control Output 1 • Relay output • Voltage output (for driving SSR) • Current output • Long-life relay output (hybrid) Control Output 2 • None • Voltage output (for driving SSR) 2 Auxiliary Outputs 2 line Display: PV and SV 4-digit, 11 segment display E5CN • Auto/manual switching • Temperature Controller status display • Simple program function • Control output ON/OFF count alarm • PV change rate alarm • Models optional with RS-485 communications This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product. E5CN/E5AN/E5EN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156) E5CN/E5AN/E5EN Digital Temperature Controllers Communications Manual Basic Type (Cat. No. H158)

Digital Temperature Controllers E5CN/E5CN-U 1 Digital Temperature Controllers E5CN/E5CN-U This Best-selling General-purpose 48×48-mm Temperature Controller Is Now Even Better. USB-Serial Conversion Cable and Support Software Are Also Available. • Controllers now available with analog inputs. • Faster sampling at 250 ms. • Transfer output provided for easy output to recorders. • Voltage outputs (to drive SSRs) for both heating and cooling control. Can be used for alarms to provide three alarm outputs. • Models available with three-phase heater burnout detection and SSR fault detection. • Easy setting with 11-segment displays. • Connect to either a thermocouple or platinum resistance thermometer with the same model. • Easily see the status from a distance with PV display with three- color switching function. • Setting protection indicator informs operator when protection is enabled. • Manual output provided. • Controller available with long-life relay output. • Models available with external power supply for ES1B Infrared Thermosensor. Note: Refer to Precautions on page 21. Note: Refer to page 19 for information on changes in comparison to previous models. Features Improved Functions for a Wider Range of Application Control Analog Values, such as Pressures, Flowrates, and Levels The E5CN Series now also includes models that accept analog inputs, enabling control applications other than for temperature, including pressure, flowrate, level, humidity, and weight control. Note: E5CN-@L (Models with Analog Inputs) Faster Sampling at 250 ms The previous sampling time of 500 ms has been reduced by half to 250 ms. This enables the E5CN to handle application requiring even greater response speed and accuracy. Easy Connector to a Recorder A transfer output now makes it easy to connect to a recorder or PLC Analog I/O Unit. Note: E5CN-C@ (Models with Current Outputs) Voltage Outputs (to Drive SSRs) for Both Heating and Cooling Control. Can Be Used for Alarms to Provide Three Alarm Outputs. Voltage outputs can be used for both heating and cooling for Models with Two Control Outputs. Also, control output 2 can be set for use as an alarm output, to enable using up to three alarm outputs. Note: E5CN-@Q (Option Board) Three-phase Heater Burnout Detection With Models with Three-phase Heater Burnout and SSR Failure Detection, two current transformers can be connected to detect both heater burnout and SSR failure at the same time, reducing costs because a separate heater burnout alarm device is not required. SSR failure detection can be used even with Models with Single- phase Heater Burnout Alarms. Note: E5CN-@HH@ (Option Board) E58-CIFQ1 USB-Serial Conversion Cable for Computer Connection A personal computer connection is possible for models without communications. The CX-Thermo Support Software (sold separately) can be used to set parameters, monitor operation, and parameter masks. The free ThermoMini Parameter Copy Software can be used to reach E5CN parameters using communications and copy them to another E5CN to increase onsite productivity. Specifications: page 5, Dimensions: page 11 Related Product • EST2-2C-MV1 CX-Thermo Support Software: page 24 • ES1B Infrared Thermosensor: page 26

CSM_E5CN_E5CN-U_DS_E_5_2 1 Basic-type Digital Temperature Controller E5CN/E5CN-U (48 x 48 mm) New 48 x 48-mm Basic Temperature Controller with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function. • Indication Accuracy Thermocouple input: ±0.3% of PV (previous models: ±0.5%) Pt input: ±0.2% of PV (previous models: ±0.5%) Analog input: ±0.2% FS (previous models: ±0.5%) • New E5CN-U Models (Plug-in Models) with analog inputs and current outputs. • A PV/SV-status display function can be set to automatically alternate between displaying the status of the Temperature Controller (auto/ manual, RUN/STOP, and alarms) and the PV or SV. • Preventive maintenance for relays in the Temperature Controller using a Control Output ON/OFF Counter. Main I/O Functions 48 × 48-mm E5CN 48 × 48-mm E5CN-U Refer to Safety Precautions for E5@N/E5@N-H. Refer to Operation for E5@N/E5@N-H for operating procedures. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Event Inputs • None • Two Sensor Inputs • Universal thermocouple/Pt inputs (Models with temperature inputs) • Analog current/voltage inputs (Models with analog inputs) Indication Accuracy • Thermocouple input: ±0.3% of PV • Pt input: ±0.2% of PV • Analog input: ±0.2% FS Sampling Period • 250 ms Control Output 1 • Relay output • Voltage output (for driving SSR) • Current output • Long-life relay output (hybrid) Control Output 2 • None • Voltage output (for driving SSR) Auxiliary Outputs • None • One • Two 2-level Display: PV and SV 4-digit Display E5CN • Auto/manual switching • Temperature Controller status display • Simple program function • Control output ON/OFF count alarm • PV change rate alarm • Models also available with RS-485 communications This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product. E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156) E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers Communications Manual Basic Type (Cat. No. H158)

USER´S MANUAL Digital Temperature Controller E5CN E5CN-U E5AN E5EN Cat. No. H134-E1-01A

Digital Temperature Controllers Cat. No. H156-E1-01A E5CN E5AN E5EN USER’S MANUAL