Philips PTN3501 Manuals

Philips PTN3501 Datasheet (15 pages)

• Identifier: id-458786
• Brand: Philips
• Device: Network Router
• Type: Datasheet, PDF
• Key Aspects: Calibration and Adjustment Methods, Device Specifications Overview
• UPD Date: 28.04.2026
• Source File: 442196.pdf
• Pages: 15
• Description: Device instruction guide for the Philips PTN3501. The document highlights operating procedures and firmware updates, wiring diagrams, hardware instructions.

Key Pages and Contents:

• Maintenance and control device

  2001 Jan 17 5 Addressing For addressing, see Figure 8. S 0 A5 A4 A3 A2 A1 A0 0 A A5 0 A S 1 A4 A3 A2 A1 A0 a. b. (a) I/O EXPANDER (b) MEMORY SW00648 SLAVE ADDRESS SLAVE ADDRESS Figure 8. PTN3501 slave addresses Asyn

• Maintenance and control device

  2001 Jan 17 13 SOLDERING Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circui

• Maintenance and control device

  2001 Jan 17 6 Interrupt (see Figs 11 and 12) The PTN3501 provides an open drain output (INT) which can be fed to a corresponding input of the microcontroller. This gives these chips a type of master function which ca

• Maintenance and control device

  2001 Jan 17 11 I2C-BUS TIMING CHARACTERISTICS SYMBOL PARAMETER MIN. TYP. MAX. UNIT I2C-bus timing (see Figure 19; Note 1) fSCL SCL clock frequency – – 400 kHz tSW tolerable spike width on bus – – 50 ns tBUF b