Pima VKD4net Manuals
Pima VKD4net Installation and use manual (8 pages)
- Identifier: id-1673895
- Brand: Pima
- Device: Control Unit
- Type: Installation and use manual, PDF
- Key Aspects: Common Issues and Solutions, Additional Resources for Users
- UPD Date: 17.07.2026
- Source File: 1644831.pdf
- Pages: 8
- Description: Product instruction handbook for the Pima VKD4net. The document covers safety information, installation guides, technical overview, operating guidelines.
Key Pages and Contents:
-
VKD4net Installation and Use Guide
2. Quick guide Figure 2. VKD4net opened Figure 3. VKD4net wiring diagram 3. Installation It is recommended to install the VKD4net as close as possible to the BUS. 1. Connect the VKD4net to the BUS, using 4 wires. The connection can be directly to the control pane -
VKD4net Installation and Use Guide
Figure 8. Network settings screen 4.4. Serial setting 1. Click Serial Setting on the left menu. 2. Set the Baud Rate to 2400. 3. Check the Enable Packing checkbox. 4. From the Idle Gap Time drop-down list, select 52 msec. 5. Click OK to save. The word Done! shoul -
VKD4net Installation and Use Guide
5. Installing & Running the VKD Application The VKD Virtual Keypad application is supplied on a CD. To install it: 1. Insert the CD and wait for the installation wizard to run. To manually run it, right-click the file VKD.exe, located on the CD, and select Run as -
VKD4net Installation and Use Guide
5 4.5. Connection 1. In the Endpoint Configuration section, enter the Local Port number, i.e., the port that the net4pro-i will listen to1. In the figure, the local port is set to 10001. 2. Click OK to save. The word Done! should appear next to the OK button. Figur