Planar Q2 Manuals

The portability of the Dome Surgery Review Cart allows you to implement a DICOM-compliant, PACS referral viewing station—on demand—in any area of a healthcare facility. When it is fully integrated, the cart consists of the computer unit that you supply and these components: • Review cart for attaching computer and display • Dome CXtra software for DICOM compliance • One or two displays for side-by-side image review • Cleanable keyboard and mouse • Display controller and driver • Power adapters (display dependent) The displays available in dual-unit cart configurations include the Dome C3i, Dome E2, Dome E2c, Dome E3, Dome E3c, Dome P2, and Dome Q2 displays. The Dome E4c display, designed for widescreen diagnostic imaging, is also available in a single-unit cart configuration. To facilitate integration at your location, Planar has partially assembled the review cart by prerouting power and video cables. You need only to install the display controller into your computer, attach the computer and the Dome displays to the cart, and connect the power and video cables. Check the display documentation for safety guidelines on handling the components. System Requirements Check that the computer unit you are mounting to the cart has the following bus interface per configuration: Dome RP2 or Dome RQ2 using the AX1 or EX2 board Dome RE2c using the AX1 board • AX1 board – PCIe bus with full-height 16x slot • EX2 board – AGP 8X/4X bus with full-height AGP slot: H 4.2" Dome RE3, Dome RE3c, or Dome RE4c using the AX3 board PCIe bus with full-height 16x slot Dome RC3, Dome RE2, Dome RE3, or Dome RE3c using the DX2 board Full height half length PCI slot: H 4.2" x L 6.95" (PCI64/66 slot recommended) Your computer unit must also meet the following requirements: • Size (W x H x D) – No larger than 7.5" x 18" x 20" (190 mm x 406 mm x 508 mm) • Weight – No heavier than 35 lb (16 kg) • Intel Pentium 4/Xeon clocked at 2.0 GHz (or faster), AMD Athlon/Opteron with 2000+ rating (or faster), or equivalent CPU • CD-ROM drive • Microsoft Windows XP or Windows 2000 with Service Pack 4 or higher • 256 MB or more system memory • 350 Watt (or greater) power supply The Dome E4c display mounted to the cart. Other display configurations may have variations for power supply connection and peripherals. Dome Surgery Review Cart

QUICK LINKS Contents Index Regulatory Compliance Warranty GETTING STARTED About the Display Controller Check Package Contents INSTALLING THE BOARD Check System Requirements Install Controller Connect Cables INSTALLING THE DRIVER Install Display Driver Adjust Display Properties APPENDIXES Troubleshooting Specifications Video Modes Driver Removal Gallery EX2 Display Controller Reference Guide FOR USE WITH Dome P1 System Dome P2 System Dome Q2 Display www.planar.com

Dome Q2 Display AX1 Display Controller Dome CXtra Software QUICK REFERENCE Windows XP Windows 2000 AX1-Q2-QRUG-2.qxd 3/1/05 5:12 PM Page 1

Dome Q2 Display EX2 Display Controller Dome CXtra Software QUICK REFERENCE Windows XP Windows 2000

QUICK LINKS Contents Index Regulatory Information Product Information Warranty GETTING STARTED About the Q2 Display Check Package Contents Identify Components Position the Display Desk Stand Features INSTALLING THE DISPLAY Check System Requirements Determine Chipset Installed Install EX2 Controller Connect Cables Install Display Driver Adjust Display Properties OPERATING THE DISPLAY Front-Panel Controls Screen Adjustments Dome CXtra Software APPENDIXES Troubleshooting Specifications Video Modes USB Connections Power Management System Driver Removal Gallery Dome® Q2 Display EX2 Display Controller Reference Guide www.planar.com

*** Product Notice *** Congratulations on your purchase of the Planar Dome Q2 grayscale display system. Note that the AX1 graphics controller (ATI FireGL V3200) included with this system is designed for use in PCs equipped with the new PCI Express bus. This new bus architecture offers high-speed data transfers and performance beyond what was available with the previous AGP bus. The AX1 is designed for use in all PCI Express-equipped PCs; however, there is a known incompatibility with the DELL 670 Workstation. When installed in this model PC, the system may not boot properly. Because of this problem, use of the AX1 card in the Dell 670 workstation is not recommended. If you have questions, you may contact Planar Customer Service at 1-866-PLANAR1 (1-866-752-6271), or ATI Customer Service at 1-866-284-2093. 242-0111-00A

The portability of the Dome Surgery Review Cart allows you to implement a DICOM-compliant, PACS referral viewing station— on demand—in any area of a healthcare facility. When it is fully integrated, the cart consists of the computer unit that you supply and these components: • Review cart for attaching a computer and two displays • Dome CXtra software for DICOM compliance • Dual Dome displays for side-by-side image review • Cleanable keyboard and mouse • Display controller and driver • Power adapters (display dependent) To facilitate integration at your location, Planar has partially assembled the review cart by prerouting power and video cables. You need only to install the display controller into your computer, attach the computer and the displays to the cart, and connect the power and video cables. Check the display documentation for safety guidelines on handling the components. System requirements Check that the computer unit you are mounting to the cart meets the requirements of the Dome displays, display controller and driver, and Dome CXtra software. Dome P2 or Q2 display using the EX2 display controller • Intel Pentium 4/Xeon clocked at 2.0 GHz (or faster), AMD Athlon/Opteron with 2000+ rating (or faster) • Microsoft Windows XP or Windows 2000 operating system • AGP 8X/4X bus with full height AGP slot: H 4.2" • 256 MB system memory (512 MB or more recommended) • CD-ROM drive • 300 Watt (or greater) power supply Dome CX display using the DX or DX2 display controller • Intel Pentium 4/Xeon clocked at 2.0 GHz (or faster), AMD Athlon/Opteron with 2000+ rating (or faster), or equivalent CPU • Microsoft Windows XP or Windows 2000 operating system • Full height half length PCI slot: H 4.2" x L 6.95" (PCI64/66 slot recommended for maximum performance) • 256 MB system memory (512 MB or more recommended) • CD-ROM drive • 200 Watt (or greater) power supply Computer specifications Your computer unit must not exceed these specifications: • Weight – 35 lb (16 kg) • Size (W x H x D) – 7.5" x 16" x 20" (190 mm x 406 mm x 508 mm) Here, dual Dome C3i displays are mounted to the cart. Other display configurations may have variations for power supply connection and peripherals. Dome Surgery Review Cart

QUICK LINKS Contents Index Regulatory Compliance Product Information Warranty GETTING STARTED About the Q2 Display Check Package Contents Identify Components Position the Display Desk Stand Features INSTALLING THE DISPLAY Install AX1 Controller Connect Cables Install Display Driver Adjust Display Properties OPERATING THE DISPLAY Front-Panel Controls Screen Adjustments Dome CXtra Software APPENDIXES Troubleshooting Specifications USB Connections Power Management System Driver Removal Dome ® Q2 Display AX1 Display Controller Reference Guide www.planar.com