PLUSOPTIX S12C Manuals

Binocular Autorefractor Short Manual 1 “Adjusting settings and setting up WLAN” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018

Binocular Autorefractor Short Manual 4 “Entering, retrieving or deleting patient data” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 10/18/2018

Binocular Autorefractor Short Manual 7 “Exporting back-ups and reports (only plusoptiX A12C and A16)” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018

Binocular Autorefractor Short Manual 2 “Preparing and performing a measurement” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018

Binocular Autorefractor Short Manual 1 „Checking the scope of delivery and learning about the device” Plusoptix GmbH Neumeyerstrasse 48 90411 Nürnberg Deutschland www.plusoptix.com Version: 16.12.2019

Vision Screener Short Manual 9 “Troubleshooting malfunctions and measuring interruptions” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018

Vision Screener Short Manual 8 “Downloading software updates” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018

Vision Screener Short Manual 5 “Documenting measurement results electronically” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 10/18/2018

plusoptiX S12C & S12R – Short Manual English, MS, 20.01.2016 Handling of the device wrong right Measurement requirements 1. The examination room should only be slightly illuminated, i.e. no direct daylight. Halogen spotlights and light bulbs are emitting infrared light and should be switched off during measurements. Fluorescent lamps and energy-saving lamps are permitted for lightning the room. 2. Please make sure that the child is not distracted during the measurement. 3. Switch on the device . When the start screen appears, please select the age-group of the child and start the measurement by pressing the orange measurement button next to the screen. 4. The measurement is performed from a distance of one meter (+/- 5 cm) from the child. Start the measurement from approximately 1,2 m distance to the child. Move forward until the pupils are clear and outlined with green circles. At this moment the sound will appear again to signalize that the measurement starts now. 5. It is important to hold the camera on eye-level when performing a measurement. Please make sure that the pupils are not covered by eyelashes, the eyelid or hair. If no screening result appears, a status message will be displayed. In this case please follow the instructions, outlined on the rear side of this page. plusoptiX S12C plusoptiX S12R 12VDC input SD card Mini USB USB On/Off button Shutter button Touchscreen Touchscreen 12VDC input SD card Mini USB USB Shutter button On/Off button 1m ± 5 cm

Vision Screener Short Manual 3 “Viewing the measurement results” Plusoptix GmbH Neumeyerstrasse 48 90411 Nuremberg Germany www.plusoptix.com Edition: 09/17/2018