Porter-Cable FC350 Manuals

Porter-Cable FC350 Instruction manual (15 pages)

• Identifier: id-614018
• Brand: Porter-Cable
• Device: Nail Gun
• Type: Instruction manual, PDF
• Key Aspects: Comparative Analysis of Various Features, Common Use Cases Explained, Detailed Product Specifications
• UPD Date: 16.06.2026
• Source File: 608011.pdf
• Pages: 15
• Description: Operation and maintenance manual for the Porter-Cable FC350. The document elaborates on device functions and firmware updates, power management, usage tips, performance details.

Key Pages and Contents:

• CLEARING A JAMMED FASTENER

  Disconnect tool from air supply. 1. Remove any remaining fasteners from the nailer. A. Pull follower all the way to the rear, until it latches (A) Fig. 26. B. Slide fasteners to the rear, and remove from magazine (see Fig. 27). 2. Use a pair of needle nose pliers and/or

• ONE YEAR WARRANTY

  Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination,

• Do not load fasteners with trigger or safety depressed.

  Only use approved Porter-Cable fasteners. Operator and others in work area MUST wear safety glasses with side shields. Always wear ANSI Z87.1 approved safety glasses, and ANSI S3.19 approved hearing protection when preparing or operating the

• CLEAN AND INSPECT DAILY

  Disconnect tool from air supply before cleaning and inspection. Correct all problems before placing the tool back in use. Wipe tool clean and inspect for wear or damage. Use non-flammable cleaning solutions to wipe exterior of tool only if necessary. DO NOT SOAK tool with