Precor M9.45 Manuals

C O M M E R C I A L P R O D U C T S D I V I S I O N Precor Handrail Option Kit Fits Precor C944, C942, C940, M9.45, M9.41s Treadmills Thank you for purchasing the Precor Handrail Option Kit. Each kit comes complete with all the hardware required to install a handrail on one side of the treadmill. If you wish handrails on both sides of the treadmill, you must order two (2) option kits. When you receive the Handrail Option kit, check its contents with the list below: Note: If you purchase both handrails, check the contents of both kits with the list below: Handrail Option Kit Contents One handrail One upper end clamp One upper center clamp Three large bolts (two 5/16 - 18 x 2.5 and one 1/4 - 20 x 2.5) One star washer One nut plate One lower clamp One 5/32" hex key One 3/16" hex key Note: To assemble the handrail(s), you will need a Phillips head screwdriver. ASSEMBLY INSTRUCTIONS The assembly of each handrail is the same on opposite sides of the treadmill. To properly install the handrail(s) on your unit, take the following steps: CAUTION: Turn OFF the unit and unplug it from the power source before installing the handrail(s).