Pro-Elec PELL0060 Manuals

1 LOCAL AIR CONDITIONER Model: PELL0060 2 IMPORTANT SAFETY INFORMATION • Do not use any means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer. • The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating gas appliance or an operating electric heater). • Do not pierce or burn. • Be aware that refrigerants may not contain an odour. • The appliance shall be installed, operated and stored in a room with a floor area larger than 13m2. • Keep any required ventilation openings clear of obstruction. • Servicing shall be performed only as recommended by the manufacturer. • The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation. • Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an industry-accredited assessment authority, which authorises their competence to handle refrigerants safely in accordance with an industry recognised assessment specification. • Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of flammable refrigerants. • All working procedure that affects safety means shall only be carried by competent persons. • The appliance is only suitable for indoor use, and is not suitable for other applications. • Follow local grid interconnection rules while installing the appliance and ensure that it is properly grounded. If you have any question on electrical installation, follow the instructions of the manufacturer, and if necessary, ask a professional electrician to install it. • Place the appliance in a level and dry place and keep a distance of above 50cm between the machine and the surrounding objects or walls. • After the appliance is installed, ensure that the mains plug is intact and firmly plugged into the power outlet, and place the power cord to avoid a trip hazard. • Do not put any object into the air inlet and outlet of the air conditioning. Keep the air inlet and outlet free from obstructions. • When drainage pipes are installed, ensure that the drainage pipes are properly connected, and are not distorted or bent. • While adjusting the upper and lower wind-guide strips of the air outlet, use gentle finger pressure to avoid damaging the wind-guide strips. • When moving the appliance, make sure that it is in an upright position. • The appliance should be kept away from gasoline, flammable gas, stoves and other heat sources. • Don’t disassemble, overhaul and modify the appliance arbitrarily, otherwise it may cause a malfunction or harm to persons and properties. • To avoid danger, if a machine failure occurs, refer to a professional for repair. Please read these instructions carefully before use and retain for future reference. 3 TRANSPORTATION AND STORAGE • Do not install and use the appliance in a bathroom or other humid environments. • Do not pull out the mains plug to turn off the appliance. • Do not place cups or other objects on the appliance to prevent water or other liquids from spilling into the air conditioning. • Do not use insecticide sprays or other flammable substances near the appliance. • Do not wipe or wash the appliance with chemical solvents such as gasoline and alcohol. When you need to clean the air conditioning, you must disconnect the power supply, and clean it with a half-wet soft cloth. If the machine is really dirty, scrub with a mild detergent. • The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The appliance shall be installed in accordance with local wiring regulations. Transportation and labelling • Transport of equipment containing flammable refrigerants must be in compliance with the transport regulations. • Marking of equipment using signs in compliance with local regulations • Disposal of equipment using flammable refrigerants in compliance with national regulations. Storage of equipment/appliances • The storage of equipment should be in accordance with the manufacturer’s instructions. 4 PRODUCT OVERVIEW Front 1 Top Panel 2 Air Outlet Louvres 3 Handle 4 Front Casing 5 Rear Casing 6 Castor Back 7 Filter Housing 8 Continual Drainage Outlet 9 Air Outlet 10 CON Filter 11 Manual Drainage Outlet Accessories 12 Remote Control 13 Exhaust hose 14 Adjustable window guide 7 9 10 12 13 12 3 5 4 6 8 14 2 1