PRÜFTECHNIK ROTALIGN ALI 3.500 Manuals

PRÜFTECHNIK ROTALIGN ALI 3.500 Operating instructions and alignment handbook (164 pages)

• Identifier: id-1669224
• Brand: PRÜFTECHNIK
• Device: PRÜFTECHNIK ROTALIGN ALI 3.500 Laser Shaft Alignment Tools
• Type: Operating instructions and alignment handbook, PDF
• Key Aspects: Accessories and Add-Ons Overview, Testing and Quality Assurance Processes, Operational Efficiency Guidelines
• UPD Date: 17.07.2026
• Source File: 1649502.pdf
• Pages: 164
• Description: Technical instruction manual for the PRÜFTECHNIK ROTALIGN ALI 3.500. This manual describes setup, usage, and product maintenance, basic operation, software updates.

Key Pages and Contents:

• Select horizontal alignment

  Press the softkey marked with the coupled horizontal shafts to enter the standard horizontal machine alignment application. Hints on using the program The ROTALIGN computer program is intended to be easy to use— even for a computer novice. Feel fre

• Horizontal machine alignment - measurement

  Start measurement 4-34 View detector planes page 2-15 A series of measurements, are listed in a table, which can be selected and averaged page 4-48 Soft foot page 4-29 see below CENTERED! MEAS. MODE has the following measurement mode

• Horizontal machine alignment - options during results

  Shown in the first of the two figures below are the results obtained for a typical pair of machines. At first glance the results appear to be satisfactory and within tolerance: If, however, the following operating specificat

• Once sufficient measurement data are available, the CURVE FIT

  option appears in the XY VIEW screen. Displayed in this screen is the YY ellipse, a representation of angularity (X-axis) versus shaft offset (Y-axis). If the trace is a thin ellipse centered around the X