quadient IS-440 Manuals

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder (see respective Quick Install Guides), 2 Base, 3 Catch tray. CONNECT THE LAN to a network RJ45 plug of the Base and to the LAN wall socket using the LAN cable B . OPEN THE BASE COVER, remove the headset protecting strips and insert the headset in its compartment, then push the headset back until it clicks. WRITE DOWN THE PSD number, you may need the number later. INSTALL THE PSD in one of the slots and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide. IS-440 QUICK INSTALLATION GUIDE CAUTION: use a solid and steady table, far from any door or fan. 7 4 8 5 3 6 2 3 1 C B C A 1 Check the box contents. 2 If included in your system, CONNECT THE SCALE (see its Quick Install Guide). For more information about your mailing system, please visit: kb.quadient.co.uk/is440_ug

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder (see respective Quick Install Guides), 2 Base, 3 Catch tray. CONNECT THE LAN to a network RJ45 plug of the Base and to the LAN wall socket using the LAN cable B . OPEN THE BASE COVER, remove the headset protecting strips and insert the headset in its compartment, then push the headset back until it clicks. WRITE DOWN THE PSD number, you may need the number later. INSTALL THE PSD in one of the slots and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide. IS-440 QUICK INSTALLATION GUIDE CAUTION: use a solid and steady table, far from any door or fan. 7 4 8 5 3 6 2 3 1 C B C A 1 Check the box contents. 2 If included in your system, CONNECT THE SCALE (see its Quick Install Guide). For more information about your mailing system, please visit: kb.quadient.ie/is440_ug

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder (see respective Quick Install Guides), 2 Base, 3 Catch tray. CONNECT THE LAN to a network RJ45 plug of the Base and to the LAN wall socket using the LAN cable B . OPEN THE BASE COVER, remove the headset protecting strips and insert the headset in its compartment, then push the headset back until it clicks. WRITE DOWN THE PSD number, you may need the number later. INSTALL THE PSD in one of the slots and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide. IS-440 QUICK INSTALLATION GUIDE CAUTION: use a solid and steady table, far from any door or fan. 7 4 8 5 3 6 2 3 1 C B C A 1 Check the box contents. 2 If included in your system, CONNECT THE SCALE (see its Quick Install Guide). For more information about your mailing system, please visit: kbhelp.quadient.com/is440_dl

INSTALL AND CONNECT THE ELEMENTS: 1 Feeder (see respective Quick Install Guides), 2 Base, 3 Catch tray. CONNECT THE LAN to a network RJ45 plug of the Base and to the LAN wall socket using the LAN cable B . OPEN THE BASE COVER, remove the headset protecting strips and insert the headset in its compartment, then push the headset back until it clicks. WRITE DOWN THE PSD number, you may need the number later. INSTALL THE PSD in one of the slots and then close the cover. CONNECT THE SYSTEM POWERPLUG. Follow the installation wizard on the screen. Refer to the installation section in the User Guide. IS-440 QUICK INSTALLATION GUIDE CAUTION: use a solid and steady table, far from any door or fan. 7 4 8 5 3 6 2 3 1 C B C A 1 Check the box contents. 2 If included in your system, CONNECT THE SCALE (see its Quick Install Guide). For more information about your mailing system, please visit: kb.quadient.us