Rheem GAS BOOSTED SOLAR WATER HEATER Manuals

Rheem GAS BOOSTED SOLAR WATER HEATER Installation and owner's manual (56 pages)

• Identifier: id-348128
• Brand: Rheem
• Device: Water Heater
• Type: Installation and owner's manual, PDF
• Key Aspects: Accessories and Add-Ons Overview, Glossary of Terms, Industry Comparisons
• UPD Date: 04.06.2026
• Source File: 314990.pdf
• Pages: 56
• Description: Setup and usage guide for the Rheem GAS BOOSTED SOLAR WATER HEATER. This documentation provides step-by-step guidance on usage tips, detailing setup, device calibration.

Key Pages and Contents:

• INSTALLATION – SOLAR STORAGE TANK

  18 The top of the solar storage tank must be a minimum of 500 mm below the bottom of the solar collectors for the system to operate correctly. As a guide the following requirements extracted from the Australian Gas Installations Standard AS 5601, must be observed.

• Minimum test point gas pressure

  Refer to the rating label on the water heater for the minimum test point gas pressure. 1. Open a hot tap slowly until the burners ignite. 2. Press and hold down the MIN button (“1L” is shown on the LED display), and observe the reading on the mano

• This water heater must be installed and serviced by an authorised person.

  Please leave this guide with the householder. “Streamline Closed Circuit” GAS BOOSTED SOLAR WATER HEATER OWNER’S MANUAL AND WARRANTY / INSTALLATION INFORMATION WARNING: Plumber – Be Aware Use copper pipe ONLY. Plastic

• This water heater may be protected by one or more patents or registered designs.

  ® Registered trademark of Solahart Industries Pty Ltd or Rheem Australia Pty Ltd. ™ Trademark of Solahart Industries Pty Ltd or Rheem Australia Pty Ltd. Notice to Victorian Customers from the Victorian Plumbi