Samsung DCS Manuals

SAMSUNG DCS INSTALLATION MANUAL

PROGRAMMING MANUAL DCS DIGITAL COMMUNICATION SY S T E M

Combined Systems Programming Manual for DCS DCS Compact DCS Compact II DCS-816 DCS-408 DCS-408i iDCS100 iDCS500 OfficeServ500

SAMSUNG COMBINED PROGRAMMING MANUAL for DCS DCS COMPACT DCS COMPACT II DCS-816 DCS-408 DCS-408i DCS

SAMSUNG DCS Single Line Telephone Quick Reference Guide Personal Speed Dial Directory 00 01 02 03 04 05 06 07 08 09 Part No: 12799

SAMSUNG DCS PROGRAMMING TECHNICAL MANUAL SECTION Page 1 of 280 DCS & DX I&M August 2001 INTRODUCTION TO PROGRAMMING 1.1 PROGRAMMING OVERVIEW The DCS system arrives from the factory with default data. Connect it to trunks, stations and power, turn the system on and it is fully operational. The only thing left to do is customize the data to fit the customer’s needs. This is called programming the system. MMC stands for Man Machine Code and each program is assigned a different three digit code. These MMC codes are used to view, create or change customer data. Programming is simply deciding what needs to be done and knowing which MMC is used to do it. For example, use MMC 601 to create a station group. System speed dial numbers are entered in MMC 705 and soft keys are assigned to individual keysets using MMC 722. System programming may be done from any LCD 12B, LCD 24B (Euro style), Falcon 18B or Falcon 28B keyset or via a PC using PCMMC software. The first thing you must do is open system programming. As a security measure, a passcode must be entered to do this. Figure 1–1 illustrates the keys on a display keyset that have special functions during programming. When required, these keys will be referred to by the names described in the diagram. 1.2 PROGRAMMING LEVELS There are three levels of programming: SYSTEM, CUSTOMER and STATION. System and customer levels are under passcode protection while station programming does not require a passcode. To prevent conflicting data from being entered, only one person at a time can enter programming with the technician or customer passcode. While programming is in progress, normal system operation is not affected. For your convenience, the system displays [xxx IN PGM MODE] when another keyset is in the program mode. A. System level This level is entered via MMC 800 and requires the technician level passcode. It allows access to all system programs, station programs and maintenance programs. B. Customer level This level is entered via MMC 200 and requires the customer passcode. It allows access to station programs and system programs allowed by the technician in MMC 802. When using the customer passcode to access station programs, data for all stations can be viewed or changed. NOTE: When the system is programmed for multiple tenant use, each tenant has an individual customer passcode enabled in MMC 201. The access for tenant passcode is limited to only certain MMCs. See MMC 201 for more details. After opening programming with the customer passcode, you must press TRSF to exit. Now press TRSF and the MMC number you wish to access. C. Station level All keysets can access station programs 102 ~ 119 without using a passcode. Each user can only change station data for his/her own keyset. When the LCD 12B, LCD18B, LCD24B or LCD 28B keyset is in programming, the display shows instructions, prompts and choices. Existing data is always displayed before it can be changed. The keystroke sequence for each MMC is detailed in the following pages.

SAMSUNG DCS GATEWAY SINGLE LINE TELEPHONE USER GUIDE DIGITAL COMMUNICATION GATEWAY SYSTEM

SAMSUNG DCS SINGLE LINE TELEPHONE USER GUIDE