Sanyo PLC-SU20E Manuals

Sanyo PLC-SU20E Owner's manual (40 pages)

• Identifier: id-2092016
• Brand: Sanyo
• Device: Projector
• Type: Owner's manual, PDF
• Key Aspects: Illustrations and Diagrams Demonstrating Processes, Field Test Results
• UPD Date: 10.08.2026
• Source File: 2195840.pdf
• Pages: 40
• Description: Product instruction handbook for the Sanyo PLC-SU20E. The document contains software installation, operating conditions, technical specifications, usage examples.

Key Pages and Contents:

• High voltages are used to operate this projector. Do not attempt to open the cabinet.

  Remote Control Unit does not work. G Check the batteries. G Check the ALL-OFF switch on the Remote Control Unit is set to “ON.”. G Make sure anything is blocking between the Remote Receiv

• G Do not cover the vent slot.

  G Keep the rear grill at least one meter away from any object. G Make sure that there is no object on both sides of the projector. Those obstacles may prevent the projector from taking the cooling air through the side Air Intake Vent Slots. This projector

• OPERATING WIRELESS MOUSE

  INSTALLATION The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation. The wireless mouse is

• LAMP REPLACEMENT INDICATOR

  When the life of the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image becomes dark or the colour of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the A

Sanyo PLC-SU20E Service manual (10 pages)

• Identifier: id-2309300
• Brand: Sanyo
• Device: Projector
• Type: Service manual, PDF
• Key Aspects: Illustrations and Diagrams Demonstrating Processes, Updates on New Features
• UPD Date: 14.08.2026
• Source File: 1978324.pdf
• Pages: 10
• Description: Complete operating guide for the Sanyo PLC-SU20E. The manual provides information on energy usage, maintenance, maintenance procedures, shutdown procedures.

Key Pages and Contents:

• PLC-SU20E :1 122 068 00

  (PA6C) PLC-SU20B :1 122 068 02 REFERENCE NO. SM5110048-01 FILE NO. Notice CORRECTION G PRODUCTION CHANGE SERVICE FLASH ADD INFORMATION REVISION-1 Please add this notice to the Service Manual listed below. Category : Multi-media Projector Issued Date : Apri

• Differences between Service Ref. No. PLC-SU20E-00/PLC-SU20B and PLC-SU20E-01/PLC-

  SU20B-01 as follows; I Electrical Parts List G LCD panels were changed as follows; Service Ref.No. PLC-SU20E-00 Service Ref.No. PLC-SU20E-01 PLC-SU20B-00 PLC-SU20B-01 COMBINATION-(1) EL901G LCD(P09S

• 1. Receive the 16-step grey scale video signal.

  2. Set to VIDEO mode. [R-VIDEO GAIN ADJUSTMENT] 3. Connect an oscilloscope to test point “TP2211R” (+) and chassis ground (-). 4. Enter to the service mode, select item no. “49” and change data value to adjust “a” to be 1.12

• Apr./2000 1300 SI

  Printed in Japan SANYO Electric Co., Ltd.

Sanyo PLC-SU20E Service manual (100 pages)

• Identifier: id-317225
• Brand: Sanyo
• Device: Projector
• Type: Service manual, PDF
• Key Aspects: Accessories and Add-Ons Overview, FAQs on Installation, Device Disassembly Instructions
• UPD Date: 14.08.2026
• Source File: 281887.pdf
• Pages: 100
• Description: Technical instruction manual for the Sanyo PLC-SU20E. This guide explains technical procedures for safety, adjustment procedures, usage procedures, component overview.

Key Pages and Contents:

• 1 122 068 00

  (PA6C) PLC-SU20B: 1 122 068 02 Original Version REFERENCE NO. SM5110048 FILE NO. Model No. PLC-SU20E (Europe, Asia, Africa, M.E.) PLC-SU20B (U.K.) Give complete “Service Ref. No.” for parts order or servicing, it is

• Feb./2000/ 1300 SI Printed in Japan

  SANYO Electric Co., Ltd.

• C635 403 167 8603 CERAMIC 220P K 2K

  C636 403 083 4307 POLYPRO 0.022U J 400V C637 403 074 9502 CERAMIC 680P K 50V C638 403 156 8805 ELECT 1U M 50V C639 403 148 1807 ELECT 220U M 35V C640 403 070 2606 CERAMIC 0.1U Z 50V

• Optical Parts Disassemblies

  The optical parts must be mounted in specified direction otherwise the picture image will not reproduce correctly. G Mounting direction of Lens (Key No. 2, 3, 4, 5, 6, 7) Lens (Key No. 2) is mounted as shown in Fig.9. Lens (Key No. 3, 7) have no specified mounting di