SEH myUTN-52 Manuals

SEH myUTN-52 Operation & user’s manual (148 pages)

• Identifier: id-327973
• Brand: SEH
• Device: Server
• Type: Operation & user’s manual, PDF
• Key Aspects: Testing and Quality Assurance Processes, Operational Efficiency Guidelines
• UPD Date: 26.05.2026
• Source File: 293539.pdf
• Pages: 148
• Description: Operating and setup manual for the SEH myUTN-52. This manual provides information on operating modes, user settings, firmware updates, safety guidelines.

Key Pages and Contents:

• myUTN User Manual

  44 3.6 How to Configure POP3 and SMTP (only myUTN-80 and later) You must configure the protocols POP3 and SMTP on the UTN server so that the notification service (Ö57) and the remote maintenance via email (Ö31) will work properly. POP3 'POP3' (Post Office Proto

• myUTN User Manual

  21 closing of an application in combination with a device connection. • Additional tool 'utnm': This tool is used for the activation and deactivation of USB devices. To this purpose, commands are entered and run in the command-line interface of the operati

• myUTN User Manual

  80 6.1 How to Define the Encryption Level for SSL/TLS Connections The following connections on the UTN server can be encrypted via SSL/TLS: • Email: POP3 (Ö44) • Email: SMTP (Ö44) • Web access to the myUTN Control Center: HTTPS (Ö82) • Data transfer betwe

• myUTN User Manual

  23 If used in server-based environments (Citrix XenApp, Microsoft Remote Desktop Services/Terminal Services) and virtualized environments (VMware, Citrix XenDesktop, Microsoft HyperV, etc.), the Windows system may lack required drivers. The installation routi

SEH myUTN-52 Operation & user’s manual (124 pages)

• Identifier: id-327982
• Brand: SEH
• Device: Server
• Type: Operation & user’s manual, PDF
• Key Aspects: Maintenance Reminder Alerts, Seasonal Maintenance Suggestions
• UPD Date: 31.03.2026
• Source File: 293548.pdf
• Pages: 124
• Description: Installation guide for the SEH myUTN-52. It explains operating conditions, startup procedures, device features.

Key Pages and Contents:

• Working with the SEH UTN Manager

  myUTN User Manual 55 5.3 How to Connect an USB Device to a Client A USB device that is connected to the UTN server can be connected to the client. The USB device can then be used by the client as if the USB device was directly connected to the client. Requirements ;

• Working with the SEH UTN Manager

  myUTN User Manual 52 5 Working with the SEH UTN Manager What information do you need? • ’How to Find UTN Servers/USB Devices in the Network’ Ö53 • ’How to Add USB Devices to the Selection List’ Ö54 • ’How to Connect an USB Device to a Client�

• myUTN User Manual

  96 8 Appendix What information do you need? • ’Glossary’ Ö97 • ’Parameter List’ Ö100 • ’LED Display’ Ö114 • ’SEH UTN Manager Function Overview’ Ö115 • ’Troubleshooting’ Ö117 • ’List of Figures’ Ö121 • ’Index’

• Appendix - List of Figures

  myUTN User Manual 121 8.6 List of Figures UTN Server in the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 myUTN Control Center - START . . . . . . . . . . . . . . . . . . . . . . . . . . 18 SEH UTN Manager - Main Dialog . . . . . . . . . . . . .

SEH myUTN-52 Operation & user’s manual (103 pages)

• Identifier: id-327984
• Brand: SEH
• Device: Server
• Type: Operation & user’s manual, PDF
• Key Aspects: Technical Details and Specifications, Operational Efficiency Guidelines, Summary of Key Features
• UPD Date: 26.06.2026
• Source File: 293550.pdf
• Pages: 103
• Description: Technical instruction manual for the SEH myUTN-52. This documentation highlights features and calibration steps, safety precautions, device features, control functions.

Key Pages and Contents:

• myUTN User Manual

  16 2 Administration Methods You will get information on when to use these methods and which functions these methods support. What information do you need? • ’Administration via the myUTN Control Center’ Ö17 • ’Administration via the SEH UTN Ma

• Network and Device Settings

  myUTN User Manual 30 Configuring IPv4 Parameters via the myUTN Control Center Proceed as follows: 1. Start the myUTN Control Center. 2. Select NETWORK - IPv4. 3. Configure the IPv4 parameters; see: Table 4 Ö30. 4. Click Save to confirm. ª The settings are saved. Table

• myUTN User Manual

  7 1.2 Documentation Structure of the Documentation The myUTN documentation consists of the following documents: Document Features This documentation has been designed as an electronic document for screen use. Many programs (e.g. Adobe Reader) offer a bookmark na

• Connected USB Devices

  myUTN User Manual 50 4.5 How to Cut the Connection between the USB Device and the Client Close the connection to the USB device when the device is no longer needed. This allows other network participants to access the USB device. Usually the connection is cut by the user via th

SEH myUTN-52 Quick installation manual (32 pages)

• Identifier: id-986756
• Brand: SEH
• Device: Server
• Type: Quick installation manual, PDF
• Key Aspects: Testing and Quality Assurance Processes, Additional Resources for Users, Best Practices for Troubleshooting
• UPD Date: 02.08.2026
• Source File: 1171733.pdf
• Pages: 32
• Description: Full operation manual for the SEH myUTN-52. It explains installation, setup, and control functions, maintenance schedule, device overview, security instructions.

Key Pages and Contents:

• 24 [de] Quick Installation Guide

  SEH UTN Manager starten Starten Sie auf Ihrem Client den SEH UTN Manager über das Windows- Startmenü. (Start --> Programme --> SEH Computertechnik GmbH --

• 32 Quick Installation Guide

  Manufactured by: SEH Computertechnik GmbH Suedring 11 33647 Bielefeld Germany Phone: +49 (0)521 94226-29 Fax: +49 (0)521 94226-99 Support: +49 (0)521 94226-44 Ema

• 4 [en] Quick Installation Guide

   General Information Purpose The myUTN-52 allows you to access non-network-ready USB devices (e.g. hard disks, etc.) in the network. For this purpose, the U

• Quick Installation Guide [de]

  29

SEH myUTN-52 Operation & user’s manual (148 pages)

• Identifier: id-327975
• Brand: SEH
• Device: Server
• Type: Operation & user’s manual, PDF
• Key Aspects: Advanced Usage Techniques, Tips for Best Performance, Glossary of Terms
• UPD Date: 04.07.2026
• Source File: 293541.pdf
• Pages: 148
• Description: User instruction manual for the SEH myUTN-52. It explains troubleshooting and performance guidelines, technical overview, hardware components.

Key Pages and Contents:

• myUTN User Manual

  99 3. Select TTLS from the Authentication method list. 4. Enter the user name and the password that are used for the configuration of the UTN server on the RADIUS server. 5. Select the settings intended to secure the communication in the TLS channel. 6. To make the connect

• Appendix - Parameter List

  myUTN User Manual 123 Table 26: Parameter List - Date/Time any_hash [Hash] md5 sha md5 Specifies the hash algorithm of the SNMP user group 1. any_cipher [Encryption] --- [None] aes des --- Defines the encryption method of the SNMP user group 1. admin_name [User name] max. 6

• myUTN User Manual

  8 Structure of the Documentation The myUTN documentation consists of the following documents: Document Features This documentation has been designed as an electronic document for screen use. Many programs (e.g. Adobe Reader) offer a bookmark navigation feature t

• myUTN User Manual

  33 Configuring IPv4 Parameters via the myUTN Control Center Proceed as follows: 1. Start the myUTN Control Center. 2. Select NETWORK - IPv4. 3. Configure the IPv4 parameters; see: Table 3 Ö33. 4. Click Save & Restart to confirm. ª The settings are saved. Table