SEWOO WTP-100 Manuals

SEWOO WTP-100 Technical manual (84 pages)

• Identifier: id-1057005
• Brand: SEWOO
• Device: Printer
• Type: Technical manual, PDF
• Key Aspects: Usage Recommendations Under Different Conditions, Customer Testimonials, Tips for Cleaning and Maintenance
• UPD Date: 13.03.2026
• Source File: 1101395.pdf
• Pages: 84
• Description: Setup instructions for the SEWOO WTP-100. The document offers guidance on compatibility information, backup procedures, technical guidelines, hardware components.

Key Pages and Contents:

• TITLE : WTP-100

  Document : 010608C Revision : 01 06/ 08/ 2001 Page8 thickness in the range 65 ㎛ to 75 ㎛). 25 million lines (based on an average printing rate of 12.5% with paper thickness in the range 76 ㎛ to 150 ㎛) 2) Cutter Life: 3.0 million cuttings (if th

• TITLE : WTP-100

  Document : 010608C Revision : 01 06/ 08/ 2001 Page65 Hex D 42 n Decimal 29 66 n [Range] 0 ≤ n ≤ 255 [Description] Turns on or off white/black reverse printing mode. When the LSB of n is 0, white/black reverse printing mode is turned off. When the

• TITLE : WTP-100

  Document : 010608C Revision : 01 06/ 08/ 2001 Page50 Each setting for the printable area is calculated as follow: x0 = [(xL + xH x 256) x (horizontal motion unit)] y0 = [(yL + yH x 256) x (vertical motion unit)] dx = [(dxL + dxH x 256) x (horizontal m

• TITLE : WTP-100

  Document : 010608C Revision : 01 06/ 08/ 2001 Page5 1.2 Character Specifications 1) Number of characters: Alphanumeric characters: 95 Extended graphics 128 × 7 pages (including one space page) International characters: 32 ① English ② Hangul ③ C

SEWOO WTP-100 Technical manual (76 pages)

• Identifier: id-2395372
• Brand: SEWOO
• Device: Printer
• Type: Technical manual, PDF
• Key Aspects: Integration with Other Systems, Feedback and Improvement Suggestions
• UPD Date: 13.05.2026
• Source File: 2409419.pdf
• Pages: 76
• Description: Device setup manual for the SEWOO WTP-100. It provides information on safety and safety precautions, performance optimization, maintenance.

Key Pages and Contents:

• [Reference] DLE EOT, GS a

  GS v 0 m xL xH yL yH d1. . .dk [Name] Print raster bit imiage [Format] ASCII GS v 0 m xL xH yL yH d1...dk Hex 1D 76 30 m xL xH yL yH d1...dk Decimal 29 118 48 m xL xH

• ‘ Command Descriptions

  Command Notation [Name] The name of the control command. [Format] The code sequence. In this description, < > H denotes hexadecimal numbers, < >denotes decimal numbers and < > B denotes binary numbers. [

• 1. General Specifications

  1.1 Printing Specifications 1) Printing method: Thermal line printing 2) Dot density: 180dpi x 180dpi 3) Printing direction: Unidirectional with friction feed 4) Printing width: 72mm(2.83"), 512 dot positions 5) Characters per line(default): Font

• First byte (printer information)

  Bit Off/On Hex Decimal Status for ASB 0 Off 00 0 Not used. Fixed to Off 1 Off 00 0 Not used. Fixed to Off Off 00 0 Drawer kick-out connector pin 3 is LOW 2 On 04 4 Drawer kick-out connector pin 3 is HIGH Off 00 0 On-line 3 On 08 8 Off-line 4 On 10 16