Sharp GX-M10H Manuals

12/10/26 GX-M10_Front_SCEE.fm GX-M10H(OR) GX-M10H(RD) PRZENOŚNY ZESTAW CD STEREO HORDOZHATÓ CD-S SZTEREO RENDSZER PŘENOSNÝ CD STEREO SYSTÉM PRENOSNÝ CD STEREO SYSTÉM ПЕРЕНОСНА СТЕРЕОСИСТЕМА З ПРОГРАВАЧЕМ CD SISTEM CD STEREO PORTABIL „PORTABLE CD STEREO“ SISTEMA ΦΟΡΗΤΟ ΣΤΕΡΕΟΦΩΝΙΚΟ ΣΥΣΤΗΜΑ ΜΕ CD PRENOSNI CD STEREO SISTEM PORTABLE CD STEREO SİSTEMİ PRIJENOSNI CD STEREO SUSTAV PORTABLE CD STEREO SYSTEM MODEL MODEL MODEL MODEL МОДЕЛЬ MODEL MODELIS ΜΟΝΤΕΛΟ MODEL MODEL MODELU MODEL ČESKY MAGYAR POLSKI SLOVENŠČINA SLOVENSKY УКРАЇНСЬКА ROMÂNĂ LIETUVIŠKAI ΕΛΛΗΝΙΚΑ TÜRKÇE HRVATSKI ENGLISH Prosimy przeczytać strony od i do xii oraz od PL-1 do PL-22. Kérjük lapozza fel a i-xii és az HU-1 - HU-22 oldalakat. Přečtěte si strany i až xii a CZ-1 až CZ-22. Prečítajte si strany i až xii a SK-1 až SK-22. Дивись сторінки від i до xii та від UA-1 до UA-22. Vezi paginile i - xii şi RO-1 - RO-22. Žiūrėkite puslapius nuo i iki xii ir LT-1 iki LT-22. Παρακαλούμε ανατρέξτε στις σελίδες i με xii και GR-1 με GR-22. Prosimo, glejte strani i do xii in SI-1 do SI-22. Lütfen i’den xii’a kadar ve TR-1’den TR-22’a kadar sayfalari inceleyiniz. Pogledajte stranice od i do xii i od HR-1 do HR-22. Please refer to pages i to xii and E-1 to E-22. INSTRUKCJA OBSŁUGI HASZNÁLATII ÚTMUTATÓ NÁVOD NA POUŽITÍ NÁVOD NA POUŽÍVANIE ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ MANUAL DE UTILIZARE VALDYMO VADOVAS ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ PRIROČNIK ZA UPORABO KULLANIM KILAVUZU PRIRUČNIK ZA UPORABU OPERATION MANUAL iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Spis treĞci Special Notes 1 Special Notes 1 Accessories 1 Precautions 1 „ General 1 „ Volume control 1 System connections 2 „ AC power connection 2 „ DC power connection 2 „ Operation with batteries 2 „ Demonstration mode 2 „ Connecting iPod or iPhone to TV 3 Remote control 3 „ Battery installation 3 „ Test of the remote control 3 Carrying the unit 3 „ Using the carrying strap 3 Placing the unit 3 General control 4 „ To turn the power on 4 „ Display and Subwoofer light up control 4 „ Volume auto fade-in 4 „ Volume control 4 „ Direct key power on function 4 „ Auto power off function 4 „ Auto resume function 4 „ Equaliser 4 „ Muting 4 „ X-Bass control 4 Listening to the iPod, iPhone or iPad 5 „ iPod, iPhone and iPad connection (USB only) 5 „ iPod, iPhone or iPad playback (USB only) 6 „ iPhone playback 6 „ iPod and iPhone connection (Dock only) 6 „ iPod or iPhone playback (Dock only) 6 „ To disconnect iPod, iPhone or iPad 6 „ Watching videos on a TV connected to iPod or iPhone 6 „ Navigating the iPod, iPhone or iPad menus 7 „ Various iPod, iPhone and iPad functions 7 Listening to a CD or MP3/WMA disc 7 „ Disc playback 7 „ Various disc functions 8 Advanced CD or MP3/WMA disc playback 8 „ Direct track search 8 „ Repeat play 8 „ Random play 9 „ Programmed play (CD) 9 „ Programmed play (MP3/WMA) 9 MP3/WMA folder mode (only for MP3/WMA files) 9 „ Procedure to playback MP3/WMA disc with folder mode on 9 Listening to USB mass storage device/MP3 player 10 „ To play back USB/MP3 player with folder mode off 10 „ To play back USB/MP3 player with folder mode on 10 „ To remove USB memory device 10 Advanced USB playback 11 Listening to the radio 11 „ Tuning 11 „ Memorising a station 12 „ To recall a memorised station 12 „ To scan the preset stations 12 „ To erase entire preset memory 12 Using the Radio Data System (RDS) 12 „ Information provided by RDS 12 „ Using the Auto Station Programme Memory (ASPM) 13 „ Notes for RDS operation 13 „ To recall stations in memory 13 Connecting other equipment 15 „ Connecting a guitar / microphone 15 „ Listening to the playback sounds of portable audio player, etc. 15 „ Headphones 15 Setting the clock (Remote control only) 16 Timer and sleep operation (Remote control only) 16 „ Timer playback 16 „ Sleep operation 17 „ To use timer and sleep operation together 17 Troubleshooting chart 17 „ General 17 „ CD player 17 „ Remote control 17 „ Tuner 17 „ USB 18 „ iPod, iPhone or iPad 18 „ Condensation 18 „ If problem occurs 18 „ Factory reset, clearing all memory 18 „ Care of compact discs 18 Maintenance 18 „ Cleaning the cabinet 18 Specifications 19 „ General 19 „ Ampli er 19 „ CD player 19 „ USB (MP3 / WMA) 19 „ Tuner 19 „ Speaker 19 iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. MODEL GX-M10H PORTABLE CD STEREO SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. iPhone not included. Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect speci cally to iPod, iPhone, or iPad respectively, and has been certi ed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Special Notes *TINSEA429AWZZD/*| TINSEA429AWZZ 12M R KI 1 SHARP CORPORATION 1 Accessories The following accessories are included. AC power lead x 1 Plug adaptor x 1 (for Philippines only) Remote control x 1 Stand for iPad x 1 “AA” size battery (UM/SUM-3, R6, HP-7 or similar) x 1 Dock spacer x 1 Carrying Strap x 1 Precautions „ General z Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4”) of free space along the sides, top and back of the equipment. PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER 10 cm (4”) 10 cm (4”) 10 cm (4”) 10 cm (4”) z Use the unit on a  rm, level surface free from vibration. z Place the unit at least 30 cm (12”) away from any CRT TV to avoid colour variations across the TV screen. If the variations persist, move the unit further away from the TV. LCD TV is not prone to such variation. z Keep the unit away from direct sunlight, strong magnetic  elds, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. z Do not place anything on top of the unit. z Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures. z If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system. z In case of an electrical storm, unplug the unit for safety. z Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires. z The AC power plug is used as a disconnect device and shall always remain readily operable. z Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. z The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. z No naked  ame sources, such as lighted candles, should be placed on the apparatus. z Attention should be drawn to the environmental aspects of battery disposal. z This unit should only be used within the range of 5°C - 35°C (41°F - 95°F). z The apparatus is designed for use in moderate climates. z Do not lift the unit by holding left or right side panel and the CD door, it may cause speaker diaphragm or unit damage and broken. Warning: The voltage used must be the same as that speci ed on this unit. Using this product with a higher voltage other than that which is speci ed is dangerous and may result in a  re or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is speci ed. „ Volume control The sound level at a given volume setting depends on speaker ef ciency, location, and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at switch on. Listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss. Special Notes WARNINGS z When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. z This unit contains no user serviceable parts. Never remove covers unless quali ed to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. z To prevent  re or shock hazard, do not expose this appliance to dripping or splashing. No objects  lled with liquids, such as vases, shall be placed on the apparatus. z Do not turn the volume on to full at switch on. Listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss. Caution: z This product is classi ed as a CLASS 1 LASER PRODUCT. z This product contains a low power laser device. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. Refer all servicing to quali ed personnel. 2 System connections „ AC power connection After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. Notes: z Remove all batteries when using AC power. z Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. „ DC power connection Caution: z During battery/DC operation, the unit will be set to Demo mode off with display and subwoofer light in MODE 2 to reduce the battery power consumption. z When using battery/DC power, the remote control cannot be used to turn on the unit. z Unplug the AC power lead from the unit before using the DC power. Otherwise the unit will not work. z Use only a car adaptor with DC 12V output voltage. z Insert the plugs  rmly. z When the unit is not in use for an extended period, remove the car adaptor from the car supply socket. 12V 24V Black Red Attention: connection of DC lead and battery terminals. : Connect the red battery clip to (+) on the battery terminal. : Connect the black battery clip to (–) on the battery terminal. DC power can only be used for a 12V battery. Do not use any battery besides a 12V. „ Operation with batteries 1 Disconnect the AC and DC power lead, and remove the battery compartment cover. z Connection of the AC or DC power lead to the unit disconnects the batteries. 2 Insert 10 “D” size batteries (UM/SUM-1, R20, HP-2 or similar) into the battery compartment. z When inserting or removing the batteries 5 and 0, push them towards the (-) battery terminals. z Installing the batteries incorrectly may cause the unit to malfunction. z Batteries are not included. 6 7 9 8 10 1 2 5 4 3 3 Replace the battery compartment cover. Precautions for battery use: z Insert the batteries according to the direction indicated on the rear panel. z Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. z Replace all old batteries with new ones at the same time. z Do not mix old and new batteries. Battery replacement: z When batteries are low, battery indicator “ ” will blink to show that the batteries need to be replaced. sound may become distorted and unit may automatically turn off or mute during high volume level. Reduce the volume level or replace the batteries. z When replacing the batteries, place the unit on a cushion or soft cloth to avoid damage. Cautions: z Do not use rechargeable battery (nickel-cadmium battery, etc.). z Immediately remove the discharged batteries. If the chemical leak into the unit, clean it. z Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,  re or the like. „ Demonstration mode z The  rst time the unit is plugged in with AC power, the unit will enter the demonstration mode. You will see words scroll and the subwoofer light up will operate in the  ashing mode. z To cancel the demonstration mode, press the DEMO/DIMMER button (remote control) during power stand-by mode. The unit will enter the low power consumption mode. The subwoofer light will be off. z To return to the demonstration mode, press the DEMO/DIMMER button again. z If iPod or iPhone is docked, the unit will begin charging. “iPod CHARGING” will be displayed. Do not connect the DC and AC power to the unit at the same time. To DC IN 12 V socket Car adaptor (not supplied) Socket: DC 12 V 4.5 A To AC INPUT socket Wall socket AC 110 - 240 V ~ 50/60 Hz 3 „ Connecting iPod or iPhone to TV Photo and video  les from iPod or iPhone can be viewed by connecting the system to TV/monitor. If the TV/monitor has a video input, connect it to the VIDEO OUT socket at the back of the unit and set the TV Out on the iPod or iPhone unit to “ON” position. Note: Please make sure to set iPod unit to either NTSC or PAL to match your TV signal. Please visit Apple’s homepage for further information. Remote control „ Battery installation 1 Open the battery cover. 2 Insert the supplied battery according to the terminal indicated in the battery compartment. When inserting or removing the battery, push it towards the (–) battery terminals. 3 Close the cover. Caution: z Remove the battery if the unit will not be used for a long period of time. This will prevent potential damage due to battery leakage. z Do not use rechargeable battery (nickel-cadmium battery, etc.). z Installing the battery incorrectly may cause the unit to malfunction. z Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine,  re or the like. Notes concerning use: z Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase an “AA” size battery (UM/SUM-3, R6, HP-7 or similar). z Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. z Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs. z Keep the remote control away from moisture, heat, shock, and vibrations. „ Test of the remote control Check the remote control after checking all the connections. Point the remote control directly at the remote sensor on the unit. The remote control can be used within the range shown below: REMOTE SENSOR TIMER Remote sensor 0.2 m - 6 m (8” - 20’ ) Note: Exposing the infrared remote control to direct sunlight may cause the remote control to be inoperable. Carrying the unit Caution: Before transporting the unit, remove the iPod, iPhone, iPad, USB memory device and disc from the unit. Then, set the unit to the power stand-by mode. Transporting the unit with iPod, iPhone, iPad or USB memory device left connected or discs left inside might damage the unit. „ Using the carrying strap This unit can be carried by using a supplied carrying strap. Insert the carrying strap carabiner (hook) to each end of the unit as shown below. Hole To remove the carrying strap Carabiner (hook) Hole Caution: Before carrying the unit, make sure the carabiner (hook) is properly secured and closed, otherwise it will cause damage and injury. Placing the unit This unit can be placed in 2 positions as shown below. Caution: z Make sure that the unit is placed on a  at and level surface. z Make sure to turn the unit carefully when adjusting the position. z Do not place the unit other than these 2 positions to avoid damage and injury. To get the best display viewing angle, place the unit as below. Position 1: On the shelf/table. T R O P ABLE M IS U O B C M O B G X O X-M10 Foot cushion 1 and 2 touching the surface. Position 2: On the  oor/ground O P RTABLE I S U M B C OOMBOX GX-M10 Foot cushion 2 and 3 touching the surface. 4 PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER „ To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. „ Display and Subwoofer light up control The display and subwoofer light can be changed. Main unit: 1) Press DEMO/(DIMMER)/ button for more than 3 seconds. The current mode will be displayed. 2) Within 5 seconds, press DEMO/(DIMMER)/ button to change the mode. Remote control: Press DEMO/DIMMER button to change the mode. MODE 1 MODE 2 MODE Off (Display backlight on and Subwoofer light off) (Display backlight on and Subwoofer light on) (Display backlight off and Subwoofer light off) Notes: z During battery/DC operation, the unit will be set to Demo mode off with display and subwoofer light in MODE 2 to reduce the battery power consumption. z During MODE 2, press any button to light up the display backlight for a few seconds. „ Volume auto fade-in If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level. „ Volume control Press VOLUME +/– buttons (on main unit) or VOL +/– (on remote control) to increase or decrease the volume. „ Direct key power on function When you press any of the following buttons, the unit turns on. z iPod / , CD / , USB / on the main unit or the remote control: selected function is activated. z TUNER/AUDIO IN on the main unit: last tuner or audio function is activated. z TUNER or AUDIO IN on the remote control: the unit turns on with the selected function activated. „ Auto power off function The main unit will enter the stand-by mode (when iPad, iPod, iPhone, guitar or microphone is not connected) after 15 minutes of inactivity during: iPod: Not docked. Audio In: No detection of input signal. CD: In the stop mode or no disc. USB: In the stop mode or no media. Note: However, if iPod or iPhone is docked, the unit will begin charging. “iPod CHARGING” will be displayed. „ Auto resume function The auto resume function will resume the last function and playback, should there be a power failure or the AC power lead becomes disconnected. However, CD/MP3 programme and random mode are not memorised. „ Equaliser When the EQ/(X-BASS) button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQ/(X-BASS) button repeatedly until the desired sound mode appears. ROCK FLAT VOCAL HIP HOP REGGAE SALSA No equalisation. For rock music. Vocals are enhanced. For hip hop music. For salsa music. For reggae music. „ Muting The volume is muted temporarily when pressing the button on the remote control. Press again to restore the volume. „ X-Bass control When the power is  rst turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and “X-BASS” will appear. To cancel the extra bass mode, press the EQ/(X-BASS) button. The last equaliser mode will turn on. To turn on the X-Bass mode again, press the EQ/(X-BASS) button for more than 2 seconds. General control 5 Made for: z iPod touch (4th generation) z iPod touch (3rd generation) z iPod touch (2nd generation) z iPod touch (1st generation) z iPod classic z iPod nano (6th generation) z iPod nano (5th generation) z iPod nano (4th generation) z iPod nano (3rd generation) z iPod nano (2nd generation) z iPhone 4S z iPhone 4 z iPhone 3GS z iPhone 3G z iPhone z iPad (3rd generation) z iPad 2 z iPad Caution: Please update your iPod, iPhone and iPad unit to the latest software version before using it. Please visit Apple’s homepage to download the latest version for your iPod, iPhone and iPad. Notes: z Charging terminal for iPod, iPhone and iPad: Condition DOCK USB/iPad terminal USB function YES YES (without iPod or iPhone docking) Other function (iPod / CD / Tuner / Audio In) YES NO Stand-by YES NO z Fully charge the iPod, iPhone and iPad with AC power before using GX-M10H battery operation. z The message “This accessory is not made to work with iPhone” or similar, may appear on the iPhone screen when: - battery is low. - the iPhone is not properly docked (eg. slanting). If this occurs, remove and re-dock the iPhone. z This product is made for iPod, iPhone and iPad. To prevent random interference when iPod, iPhone or iPad is connected, the headphone output is disabled, and “HPINVALD” will be displayed. You may also experience brief audio interference during incoming calls. z The headphone output is switched off during inserting iPod, iPhone and iPad unit. This is an Apple product speci cation. „ iPod, iPhone and iPad connection (USB only) 1 Insert the connector to the iPod, iPhone or iPad. iPad Connector 2 Place the iPad to the stand for iPad. Stand for iPad iPad 3 Connect the iPod, iPhone or iPad to the unit via USB connector. Note: USB/iPad terminal does not support VIDEO out. Listening to the iPod, iPhone or iPad 6 Listening to the iPod, iPhone or iPad (continued) „ iPod, iPhone or iPad playback (USB only) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the USB / button on the remote control or the main unit to select USB function. 3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will appear. Track number 4 Press the USB / button to start playback. Note: Stop button ( ) is invalid during iPod, iPhone or iPad playback. „ iPhone playback z Sound will only switch from iPhone to the main unit after authentication process is completed in approximately 10 seconds. z Incoming calls will pause the playback. z Once the calls are answered, the conversation can only be heard through the built-in iPhone speaker. Turn on the iPhone speaker or undock the iPhone to start conversation. „ iPod and iPhone connection (Dock only) Caution: Unplug all accessories from the iPod or iPhone before inserting it into the dock. Note: Do not use the docking station to connect your iPad. 1 Open the docking station door by pushing the docking station door open knob to the area marked ‘ ’. Cautions: z Close the docking station door if not in use. z Do not press the docking station door downwards when it is open as it may cause damage and injury. Docking station door 2 Dock your iPod or iPhone into the unit. Dock for iPhone iPhone iPhone (bottom) Dock connector For additional support, apply dock spacer (supplied) as shown. Docking station Dock spacer Peel off separator 1 Peel off the double sided tape separator. 2 Place the spacer on the space allocated inside the docking station as shown. „ iPod or iPhone playback (Dock only) 1 Press the ON/STAND-BY button to turn the power on. 2 Press the iPod / button on the remote control or the main unit to select iPod function. 3 Insert iPod or iPhone unit into the dock of main unit. “DOCK OK” will appear. Make sure to close the docking station door before playback. 4 Press the iPod / button to start playback. Notes: z When enjoying loud music at high volume, sound vibration is transferred to the docked iPod or iPhone. This vibration may cause the song to shuf e if the iPod or iPhone ‘Shake to Shuf e’ setting is turned on. Should this happen, turn off the ‘Shake to Shuf e’ function. z iPod touch and iPhone need to be operated itself in the following operations. 1. Returning to the home screen. 2. Selecting the application on the home screen. 3. Dragging the slider. To operate the connected iPod or iPhone, turn this unit to position 2 (refer “Placing the unit” on page 3). PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER „ To disconnect iPod, iPhone or iPad It is safe to disconnect iPod, iPhone and iPad even during playback. However, attention should be drawn when removing the iPod or iPhone from docking station to avoid damage. „ Watching videos on a TV connected to iPod or iPhone 1 Press the DISPLAY (TV OUT) button for more than 2 seconds until “V-OUT ON” appear on display. 2 Press the ENTER button to start playback. Notes: z If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed. z USB/iPad terminal does not support VIDEO OUT. z To return to watching video on iPod or iPhone screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until “V-OUT OFF” appears. z During iPod or iPhone video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV. Caution: Stop button ( ) is invalid during iPod function. 7 Listening to the iPod, iPhone or iPad (continued) „ Navigating the iPod, iPhone or iPad menus 1 Press the MENU button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu. 2 Use the TUNING ( or ) button to select an item on the menu and then press ENTER button. Note: When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or –) button on the main unit or the remote control. Adjusting the volume on the iPod, iPhone or iPad units give no effect. iPod, iPhone and iPad operations: The operations described below depend on the generation iPod, iPhone and iPad you are using. System on operation: When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit. System off (stand-by operation): When the main unit is turned to stand-by mode, the docked iPod, iPhone or connected iPad unit will automatically pause the playback. „ Various iPod, iPhone and iPad functions Function Main unit Remote control Operation DOCK USB DOCK USB Play iPod USB iPod USB Press in the pause mode. Pause iPod USB iPod USB Press in the playback mode. Track up/ down Press in the playback or pause mode. If you press the button in the pause mode, press the / button to start the desired track. Fast forward/ reverse Press and hold down in the playback mode. Release the button to resume playback. Display ____ Press to toggle display content. Repeat ____ Press to toggle repeat mode. Shuf e ____ Press for more than 2 seconds to toggle shuf e mode. Function Main unit Remote control Operation Dock/USB Dock/USB Menu ____ Press to view the iPod menu during iPod function. Enter ____ Press to con rm the selection. Cursor Up/ Down ____ Press to select the iPod menu. Listening to a CD or MP3/WMA disc PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER ON/STAND-BY CD „ Disc playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD / button on the remote control or the main unit to select CD function. 3 Open the CD compartment by pushing the CD compart- ment open knob to the area marked ‘ ’. 4 Place the disc on the spindle, label side up. 5 Close the CD compartment. 6 Press the CD / button to start playback. After the last track is played, the unit will stop automatically. Caution: z Do not place two discs in the spindle. z Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions. z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. z Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds). z Do not open the CD compartment during playback or you may be injured. 8 Listening to a CD or MP3/WMA disc (continued) Notes for CD or MP3/WMA disc: z When the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the  rst track is reached during fast reverse, the unit will enter the playback mode (only for CD). z Rewritable multi-session discs with un nished writing, can still be played. „ Various disc functions Function Main unit Remote control Operation Play Press in the stop mode. Stop DEMO/(DIMMER) Press in the playback mode. Pause Press in the playback mode. Press the / button to resume playback from the paused point. Track up/ down Press in the playback or stop mode. If you press the button in the stop mode, press the / button to start the desired track. Fast forward/ reverse Press and hold down in the playback mode. Release the button to resume playback. Advanced CD or MP3/WMA disc playback „ Direct track search By using the Numeric buttons, the desired tracks on the current disc can be played. Use the Numeric buttons on the remote control to select the desired track whilst playing the selected disc. z The Numeric buttons allow you to select up to number 9. z When selecting number 10 or higher, use the “10+” button. A. For example, to choose 13 1 Press the “10+” button once. 2 Press the “1” button. 3 Press the “3” button. B. For example, to choose 130 1 Press the “10+” button twice. 2 Press the “1” button. 3 Press the “3” button. 4 Press the “0” button. Notes: z A track number higher than the number of tracks on the disc cannot be selected. z During random play, direct search is not possible. To stop playback: Press the DEMO/(DIMMER)/ ( ) button. „ Repeat play Repeat play can play one track, all tracks or a programmed sequence continuously. To repeat one track: Press the PLAY MODE button repeatedly until “REP ONE” appears. Press the CD / button. To repeat all tracks: Press the PLAY MODE button repeatedly until “REP ALL” appears. Press the CD / button. To repeat desired tracks: Perform steps 1 - 5 in “Programmed play” section on page 9 and then press the PLAY MODE button repeatedly until “REP ALL” appears. To cancel repeat play: Press the PLAY MODE button repeatedly until “NORMAL” appears and “ ” disappears. Caution: After performing repeat play, be sure to press the DEMO/(DIMMER)/ ( ) button. Otherwise, the disc will play continuously. 9 Advanced CD or MP3/WMA disc playback (continued) „ Random play The tracks on the disc can be played in random order automatically. To random play all tracks: Press and hold PLAY MODE button on the remote control until “RANDOM” appears. Press the CD / button. To cancel random play: Press the PLAY MODE button again. “RDM” indicator will disappear. Notes: z If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. z In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.) „ Programmed play (CD) You can choose up to 32 selections for playback in the order you like. 1 Whilst in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. 2 Press the numeric button or or buttons on the remote control to select the desired track. 3 Press the MEMORY button to save the track number. 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, press the MEMORY button repeatedly. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button for more than 2 seconds. 5 Press the CD / button to start playback. „ Programmed play (MP3/WMA) 1 Whilst in the stop mode, press the MEMORY button to enter the programming save mode. 2 Press the TUNING ( or ) button on the remote control to select the desired folder. Then press the or button on the remote control to select the desired tracks. 3 Press the MEMORY button to save the folder and track number. 4 Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programmed. 5 Press the CD / button to start playback. To cancel the programmed play mode: During programmed stop mode, press the DEMO/(DIMMER)/ button. The display will show “MEM CLR” and all the programmed contents will be cleared. Adding tracks to the programme: If a programme has been previously stored, the “MEM” indicator will be displayed. Press the MEMORY button. Then follow steps 2 - 3 to add tracks. Notes: z When a CD compartment door is opened, the programme is automatically cancelled. z If you press the ON/STAND-BY button to enter the stand- by mode or change the function from CD to another, the programmed selections will be cleared. z During the programme operation, random play is not possible. MP3/WMA folder mode (only for MP3/WMA files) To play back MP3/WMA (Windows Media Audio)  le There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) music  les. Follow the instructions from the website on how to download the music  les. You can then play back these downloaded music  les by burning them to a CD-R/RW disc. z Your downloaded song/ les are for personal use only. Any other usage of the song without owner’s permission, is against the law. „ Procedure to playback MP3/WMA disc with folder mode on To play back CD-R/RW. 1 Press the CD / button, and load an MP3/WMA disc. Press the FOLDER button and disc info will be displayed. 2 Press the TUNING ( or ) button to select desired playback folder. (Folder mode on) 3 Select desired  le to be played back by pressing the or button. 4 Press the CD / button. Playback will start and  le name will be displayed. z Title, Artist and Album name are displayed if they are recorded on the disc. z In case of playback with the folder mode on, press the TUNING ( or ) button, and the folder can be selected even though it is in playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder. z Display content can be changed by pressing the DISPLAY button. File name display Folder display Counter display Album display Artist display Title display Note: If “NOTSUPRT” is displayed, it means “Copyright protected WMA  le” or “Not supported playback  le” is selected. 10 Listening to USB mass storage device/MP3 player Caution: At USB mode, once the iPod or iPhone is docked onto the unit, the iPod or iPhone will automatically start charging. ‘iPod DOCK CHARGE MODE’ will be displayed. In order to listen to any USB mass storage device / MP3 player, the iPod or iPhone must be removed from the docking station. PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER Note: This product is not compatible with MTP and AAC  le systems from USB mass storage device or MP3 player. „ To play back USB/MP3 player with folder mode off 1 Press the USB / button on the remote control or the main unit to select USB function. Connect the USB memory device that has MP3/WMA format  les on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Select desired  le to be played back by pressing the or button. 3 Press the USB / button. Playback will start and the  le name will be displayed. z Title, Artist and Album name are displayed if they are recorded in the USB memory device. z Display content can be changed by pressing the DISPLAY button. Note: To pause playback: Press the USB / button. „ To play back USB/MP3 player with folder mode on 1 Press the USB / button on the remote control or the main unit to select USB function. Connect the USB memory device that has MP3/WMA format  les on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Press the FOLDER button, and press the TUNING ( or ) button to select desired playback folder. To start playback with folder mode on, go to step 4. To change the playback folder, press the TUNING ( or ) button to select another folder. 3 Select desired  le to be played back by pressing the or button. 4 Press the USB / button. Playback will start and the  le name will be displayed. z Title, Artist and Album name are displayed if they are recorded in the USB memory device. z Display content can be changed by pressing the DISPLAY button. „ To remove USB memory device 1 Press the DEMO/(DIMMER)/ ( ) button to stop playback. 2 Disconnect USB memory device from the USB/iPad terminal. Notes: z SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. z Files compressed in MP3 and/or WMA format can be played back when connected to the USB/iPad terminal. z This USB memory’s format supports FAT 16 or FAT 32. z SHARP cannot guarantee that all USB memory devices will work on this audio system. z USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. iPod, iPhone and iPad is not prone to this condition. z This USB memory cannot be operated via USB hub. z The USB/iPad terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device. z External HDD-storage cannot be played back via USB/iPad terminal. z If the data inside the USB memory is large, it may take longer time for the data to be read. z This product can play WMA and MP3  les. It will automatically detect the  le type being played. If unplayable  le is played on this product, “NOTSUPRT” is indicated and the  le will be automatically skipped. This will take a few seconds. If abnormal indications appear on the display due to the unspeci ed  le, turn off the unit and then turn it on again. z This product relates to USB mass storage devices and MP3 players. It may however face some irregularities due to various unforeseen reasons from some devices. Should this happen, turn off the unit and then turn it on again. z During CD function, MP3 player will not be charging. 11 Advanced USB playback The following functions are the same as CD operations: Page Direct track search ...................................................................... 8 Repeat play .................................................................................. 8 Random play................................................................................ 9 Programmed play (MP3/WMA) .................................................. 9 Note: If USB memory device is not connected, “NO MEDIA” will be shown on the display. Notes: z This unit only supports “MPEG-1 Audio Layer-3” format. (Sampling Frequency is 32, 44.1, 48kHz) z Playback order for MP3  les may differ depending on the writing software used during  le download. z Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps. z For MP3/WMA  les, please put “.MP3” “.WMA” extension. Files cannot be played back if there is no MP3/WMA extension. z Playlists are not supported on this unit. z This unit can display Folder Name or File Name up to 32 characters. z Maximum total number of MP3/WMA  les is 65025. z Total number of folders read is 999 including folder with non- playable  le. However, the display shows only folder with MP3  les. z The display playback time may not be displayed correctly when playing back a variable bitrate  le. z The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during  le playback or pause mode. z WMA meta tag also supports title, artist and album name which are recorded in WMA  les. Copyright protected WMA  les cannot be played back. Listening to the radio PORTABLE MUSIC BOOMBOX GX-M10 REMOTE SENSOR TIMER „ Tuning 1 Press the ON/STAND-BY button to turn the power on. 2 Press the TUNER button on the remote control or TUNER/ AUDIO IN button on the main unit repeatedly to select FM Stereo or FM Mono. 3 Press the TUNING ( or ) button on the remote control to tune in to the desired station. z Manual tuning: Press the TUNING ( or ) button repeatedly to tune in to the desired station. z Auto tuning: When the TUNING ( or ) button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the  rst receivable broadcast station. Notes: z When radio interference occurs, auto scan tuning may stop automatically at that point. z Auto scan tuning will skip weak signal stations. z To stop the auto tuning, press the TUNING ( or ) button again. z When an RDS (Radio Data System) station is tuned in, the frequency will be displayed  rst, and then the RDS indicator will light up. Finally, the station name will appear. z Full auto tuning can be achieved for RDS stations “ASPM”, see page 13. To receive an FM stereo transmission: z Press the TUNER button to select stereo mode and “ST” indicator will be displayed. “ ” will appear when an FM broadcast is in stereo. z If the FM reception is weak, press the TUNER button to extinguish the “ST” indicator. The reception changes to monaural, and the sound becomes clearer. 12 Listening to the radio (continued) „ Memorising a station You can store 40 FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in “Tuning”. 2 Press the MEMORY button. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that station in memory. If the “MEM” indicator and preset number disappear before the station is memorised, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased. Note: The backup function protects the memorised stations for a few days should there be a power failure or the AC power lead become disconnected. „ To recall a memorised station 1 Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station. „ To scan the preset stations The stations saved in the memory can be scanned automatically. (Preset memory scan) 1 Press the PRESET ( or ) button for more than 0.5 seconds. The preset number will  ash and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the PRESET ( or ) button again when the desired station is located. „ To erase entire preset memory 1 Press the ON/STAND-BY button to enter the stand-by mode. 2 Whilst pressing down the PRESET button, press the ON/ STAND-BY button until “TUNCLEAR” appears. Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc. When tuned to an RDS station, “RDS” and the station name will be displayed. “TP” (Traf c Programme) will appear on the display when the received broadcast carries traf c information, and “TA” (Traf c Announcement) will appear whilst a traf c information is on air. “PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is received. You can control the RDS by using the buttons on the remote control only. „ Information provided by RDS Each time the RDS DISP button is pressed, the display will switch as follows: Station name (PS) Programme type (PTY) Frequency Radio text (RT) When tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order: NO PS NO PTY 98.80 MHz NO RT 13 Using the Radio Data System (RDS) (continued) „ Using the Auto Station Programme Memory (ASPM) Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store will be less. 1 Press the TUNER button on the remote control or TUNER/ AUDIO IN button repeatedly on the main unit to select TUNER function. 2 Press and hold down the RDS ASPM button on the remote control. 1 After “ASPM” has  ashed for about 4 seconds, scanning will start (87.50 - 108.00 MHz). 2 When an RDS station is found, “RDS” will appear for a short time and the station will be stored in memory. 3 After scanning, the number of stations stored in memory will be displayed for 4 seconds, and then “END” will appear for 4 seconds. To stop the ASPM operation before it is complete: Press the RDS ASPM button whilst it is scanning for stations. The stations which are already stored in memory will be kept there. Notes: z Any station which has the same frequency as the one stored in memory will not be stored. z If 40 stations have already been stored in memory, the scan will be aborted. If you want to redo the ASPM operation, erase the preset memory. z If no station have been stored in memory, “END” will appear for about 4 seconds. z If the RDS signals are very weak, station names may not be stored in memory. z The same station name can be stored in different channels. z In a certain area or during certain time periods, the station names may temporarily be different. „ Notes for RDS operation If any of the following events occur, it does not mean that the unit is faulty: z “PS”, “NO PS” and a station name appear alternately, and the unit does not operate properly. z If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. z When you receive an RDS station whose signal is too weak, information like the station name may not be displayed. z “NO PS”, “NO PTY” or “NO RT” will  ash for about 5 seconds, and then the frequency will be displayed. Notes for radio text: z The  rst 8 characters of the radio text will appear for 4 seconds and then they will scroll across the display. z If you tune in to an RDS station which is not broadcasting any radio text, “NO RT” will be displayed when you switch to the radio text position. z Whilst radio text data is received or when the text contents change, “RT” will be displayed. „ To recall stations in memory To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traf c programme, etc. ... see page 14) from the stations in memory. 1 Press the TUNER button on the remote control or TUNER/ AUDIO IN button repeatedly on the main unit to select TUNER function. 2 Press the RDS PTY button on the remote control. “SELECT” and “PTY TI” will appear alternately for about 6 seconds. 3 Within 6 seconds, press the PRESET ( or ) button to select the programme type. Each time the button is pressed, the programme type will appear. If the button is held down for more than 0.5 seconds, the programme type will appear continuously. 4 Whilst the selected programme type is  ashing (within 6 seconds), press the RDS PTY button again. After the selected programme type has been lit for 2 seconds, “SEARCH” will appear, and the search operation will start. Notes: z If the display has stopped  ashing, start again from step 2. If the unit  nds a desired programme type, the corresponding channel number will lit for about 8 seconds, and then the station name will remain lit. z If you want to listen to the same programme type of another station, press the RDS PTY button whilst the channel number or station name is  ashing. The unit will look for the next station. z If no station can be found, “NOTFOUND” will appear for 4 seconds. If you select the traf c programme: If you select the traf c programme (TP) in step 3, “TP” will appear. (This does not mean that you can listen to the traf c information at that time.) When the traf c information is broadcast, “TA” will appear. 14 Using the Radio Data System (RDS) (continued) Descriptions of the PTY (Programme Type) codes, TP (Traf c Programme) and TA (Traf c Announcement) You can search for and receive the following PTY, TP and TA signals. NEWS Short accounts of facts, events and publicly expressed views, reportage and actuality. AFFAIRS Topical programme expanding or enlarging upon the news, generally in different pres- entation style or concept, including debate, or analysis. INFO Programmes whose purpose is to impart advice in the widest sense. SPORT Programme concerned with any aspect of sport. EDUCATE Programme intended primarily to educate, of which the formal element is fundamental. DRAMA All radio plays and serials. CULTURE Programmes concerned with any aspect of national or regional culture, including language, theatre, etc. SCIENCE Programmes about the natural sciences and technology. VARIED Used for mainly speech-based programmes usually of light-entertainment nature, not covered by other categories. Examples include: quizzes, panel games, personality interviews. POP M Commercial music, which would generally be considered to be of current popular appeal, often featuring in current or recent record sales charts. ROCK M Contemporary modern music, usually written and performed by young musicians. EASY M Current contemporary music considered to be “easy-listening”, as opposed to Pop, Rock or Classical, or one of the specialised music styles, Jazz, Folk or Country. Music in this category is often but not always, vocal, and usually of short duration. LIGHT M Classical music for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. CLASSICS Performances of major orchestral works, symphonies, chamber music, etc., and including Grand Opera. OTHER M Musical styles not  tting into any of the other categories. Particularly used for specialist music of which Rhythm & Blues and Reggae are examples. WEATHER Weather reports and forecasts and meteoro- logical information. FINANCE Stock Market reports, commerce, trading, etc. CHILDREN For programmes targeted at a young audience, primarily for entertainment and interest, rather than where the objective is to educate. SOCIAL Programmes about people and things that in uence them individually or in groups. Includes: sociology, history, geography, psychology and society. RELIGION Any aspect of beliefs and faiths, involving a God or Gods, the nature of existence and ethics. PHONE IN Involving members of the public expressing their views either by phone or at a public forum. TRAVEL Features and programmes concerned with travel to near and far destinations, package tours and travel ideas and opportunities. Not for use for announcements about problems, delays, or roadworks affecting immediate travel where TP/TA should be used. LEISURE Programmes concerned with recrea- tional activities in which the listener might participate. Examples include, Gardening, Fishing, Antique collecting, Cooking, Food & Wine, etc. JAZZ Polyphonic, syncopated music characterised by improvisation. COUNTRY Songs which originate from, or continue the musical tradition of the American Southern States. Characterised by a straightforward melody and narrative story line. NATION M Current Popular Music of the Nation or Re- gion in that country’s language, as opposed to International “Pop” which is usually US or UK inspired and in English. OLDIES Music from the so-called “golden age” of popular music. FOLK M Music which has its roots in the musical culture of a particular nation, usually played on acoustic instruments. The narrative or story may be based on historical events or people. DOCUMENT Programme concerned with factual matters, presented in an investigative style. TEST Broadcast when testing emergency broad- cast equipment or receivers. ALARM! Emergency announcement made under ex- ceptional circumstances to give warning of events causing danger of a general nature. NONE No programme type (receive only). TP Broadcasts which carry traf c announce- ments. TA Traf c announcements are being broadcast. 15 Connecting other equipment The connection lead is not included. Purchase a commercially available lead as shown below. „ Connecting a guitar / microphone Caution: Be careful not to connect a bass guitar as it might damage this unit. Microphone or guitar (not supplied) Ø 6.3 mm monaural cable (not supplied) 1 Set the guitar/microphone volume (GAIN) knob to the minimum level. 2 Connect a guitar/microphone to the correct input socket. Make sure that the cable has a 6.3 mm (1/4”) diameter plug. 3 Arrange the guitar/microphone cables into the grooves of the cable holder on the left or the right side of the unit. Then, thread the cable through the bottom of the unit. Do not let the cables to be on top of the unit when using guitar/microphone as it may cause the unit to roll over causing damage and injury. Thread the cables under the unit Cable holder 4 Connect the cables to a guitar/microphone. 5 Select a source. z To mix a guitar or microphone sound with a source sound, select the playback source (iPod/CD/USB/Audio In/Tuner). z To play a guitar or using the microphone only, select ’AUDIO IN’ function. Make sure there is no playback from Audio In connection. 6 Adjust the volume (GAIN) knob on the connected equipment. z To enjoy a guitar distortion effect, turn the guitar volume (GAIN) knob to almost maximum level. Note: Before disconnecting the guitar/microphone, set the guitar/ microphone volume (GAIN) knob to the minimum level. „ Listening to the playback sounds of portable audio player, etc. Headphone (not supplied) Portable audio player, etc. Audio cable (not supplied) 1 Use a connection lead to connect the portable audio player etc. to the AUDIO IN socket. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on. 3 Press the AUDIO IN button on the remote control or TUNER/ AUDIO IN button repeatedly on the main unit to select AUDIO IN function. 4 Play the connected equipment. If volume level of the connected device is too high, sound distortion may occur. Should this happen, lower the volume of the connected device. If volume level is too low, increase the volume of the connected device. Note: To prevent noise interference, place the unit away from the television. „ Headphones z Do not turn the volume on to full at switch on and listen to music at moderate levels. Excessive sound pressure from earphones and headphones can cause hearing loss. z Before plugging in or unplugging the headphone, reduce the volume. z Be sure your headphone has a 3.5 mm (1/8”) diameter plug and impedance between 16 and 50 ohms. The recommended impedance is 32 ohms. z Plugging in the headphone disconnects the speakers automatically. Adjust the volume using the VOLUME control. GX-M10H_OM_ENG_SPC_A1.indd 1 GX-M10H_OM_ENG_SPC_A1.indd 1 2012-11-21 07:37:09 2012-11-21 07:37:09