Skipper DL850 Manuals

Skipper DL850 Operation and installation manual (72 pages)

• Identifier: id-898282
• Brand: Skipper
• Device: Marine Equipment
• Type: Operation and installation manual, PDF
• Key Aspects: Support and Resource Information, Installation Case Studies
• UPD Date: 13.07.2026
• Source File: 846274.pdf
• Pages: 72
• Description: User and installation guide for the Skipper DL850. This guide explains technical procedures for device operation tips, usage recommendations, operation.

Key Pages and Contents:

• STANDARD SYSTEM SUPPLY.

  A Basic DL850 system consists of the following units. See Appendix drawing DL8-B-101 : Description : Display / Operator Unit Transceiver Unit Sensor cable Gate valve with transducer ( sensor ) TRANSDUCER INSTALLATION. Location. The Transducer is normally i

• Sy ts em Integ tir y

  a cis B No P tci ure on LCD Screen No AC or DC power to the y ets m s y ets m si in S at ndby S oo low Screen Con rt a ts T Defe itc ve LCD modu el or fr ace n et I out of Range o atl ge )s( V Check Sw cti hes and Fus

• Screen Scope, Menu2:

  Soft key 1: MENU Chosen Menu number 2. Soft key 2: SL RANGE Select speedlog range for adjustments of the transceiver parameters, which will be activated, when speedlog turns automatically selects this range during operation. [1-5m, 5-10m, 10-15m, 15-25m, 25-40m, 40-64m, 64…

Skipper DL850 Operation and installation manual (92 pages)

• Identifier: id-898283
• Brand: Skipper
• Device: Marine Equipment
• Type: Operation and installation manual, PDF
• Key Aspects: Step-by-Step Setup Guides, User Operation Guidelines, Safety Precautions
• UPD Date: 02.05.2026
• Source File: 846273.pdf
• Pages: 92
• Description: Installation instructions for the Skipper DL850. This reference includes product specifications, hardware setup, network configuration.

Key Pages and Contents:

• Page 81 of 92

  Chapter: 11. Appendix 2 CPU PCA-6742VE setup • Connect a PC keyboard and a VGA screen to the CPU board. • Switch “On” the unit while pressing “Delete” key on the PC keyboard. • Do not release the “Delete” key before the “Setup” picture is prese

• Page 14 of 92

  Chapter: 2. Operation • Screen description “blue” shows resultant water speed and direction. • Screen description “brown” shows resultant SOG (speed over ground) and direction. (Note: Value should be close to GPS value). • Temperature is temperature in

• Page 78 of 92

  Chapter: 10. Appendix 1 Dimensional Drawing Cabinet Fig. 10.7. Cabinet Dimensions SKIPPER Electronics AS Operation and Installation DL850 270 kHz

• Page 29 of 92

  Chapter: 2. Operation Screen calibration, Menu 4, mounting settings. Softkey Name Range/value Default value Description Activate with hidden button 1 MENU 1 - 4 3 Menu 4 is selected. 2 3 4 5 SOUND SURF 1400-1550 Auto Speed of sound in water.at surface Yes (1 beep) 6

Skipper DL850 Operation and installation manual (80 pages)

• Identifier: id-1663684
• Brand: Skipper
• Device: Boating Equipment
• Type: Operation and installation manual, PDF
• Key Aspects: User Case Scenarios, System Requirements
• UPD Date: 12.03.2026
• Source File: 1655042.pdf
• Pages: 80
• Description: Product usage manual for the Skipper DL850. This documentation highlights features and installation procedures, regulatory notices, installation, usage examples.

Key Pages and Contents:

• Version: 20110624 Sw: 04.03.00

  Page 43 of 80 External Interface Ports 5 x PG 13.5 cable entry 10-12 mm Ground Stud XJ402: NMEA ports D-SUB 9 pin female XCN6: VGA terminal HDD-SUB 15 pin female XCN3: Not used D-SUB 25 pin female If required, the PG glands can be moved to other blinded holes. Extra ho

• Version: 20110624Sw: 04.03.00

  Page 75 of 80 Dimensional Drawing Cabinet Fig. 10.7. Cabinet Dimensions SKIPPER Electronics AS DL850 270 kHz Operation and Installation

• Version: 20110624 Sw: 04.03.00

  Page 11 of 80 Primary Screens Each of the operation screens contains a graphic picture and one or more menu sets confi gured on the 6 softkey buttons. The three fi rst screens are covering the primary functions. Manoeuvring within these screens are easily done by pre

• Version: 20110624Sw: 04.03.00

  Page 48 of 80 5. Start-up and system adaption System Adaption Analogue outputs and log pulse outputs range selection From screen status, menu 4, it is possible to set number of pulses per nautical mile (10/100/200/400/1000) for the log pulse outputs. Units of Measure Fr