Smartec IPSC1 Manuals

Smartec IPSC1 Operation & user’s manual (68 pages)

• Identifier: id-2063677
• Brand: Smartec
• Device: Smartec IPSC1 Controller
• Type: Operation & user’s manual, PDF
• Key Aspects: Testing Methods for the Device, Common Use Cases Explained
• UPD Date: 26.03.2026
• Source File: 2224180.pdf
• Pages: 68
• Description: Official operating instructions for the Smartec IPSC1. It describes step-by-step product maintenance, device calibration, support details, software installation.

Key Pages and Contents:

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.2.1

  • Optimal Autosense – Enables / Disables Optimal Autosense for the internal power supply • Output Voltage – Voltage of the internal power supply, set by Optimal Autosense • Measured Voltage – Measured voltage

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.2.1

  Figure 26: ScLibClient – Connect to Device 7.3. Ethernet Specific Discovery Options When using an Ethernet connection, the user can choose between Broadcast and search by IP. Broadcast is the default option and the fast

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.2.1

  3.1.1. Dimensions Figure 11: Dimensions of IPSC1 in mm and [inch]

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.2.1

  2.3.3. LED Output The LED connectors, as shown in Figure 1 and described in Table 8, provide the power output (LED) for the illumination to be driven by the controller. Scheme is shown in Figure 3. Pin# HPSC1 HPSC1 v2 HPSC

Smartec IPSC1 Operation & user’s manual (62 pages)

• Identifier: id-897524
• Brand: Smartec
• Device: Smartec IPSC1 Test Equipment
• Type: Operation & user’s manual, PDF
• Key Aspects: Recommendations for Effective Usage, User Feedback Integration Process, Energy Efficiency Tips
• UPD Date: 27.03.2026
• Source File: 847033.pdf
• Pages: 62
• Description: Instructions for safe usage of the Smartec IPSC1. This manual outlines software installation, operation, internal layout.

Key Pages and Contents:

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1

  7.8. Trigger Input 7.8.1. Trigger Input Parameters With the trigger parameters, the timing options of the Trigger- (OUT) and LED-outputs (LED) are configured. Figure 32: ScLibClient – Trigger Parameters All parameters h

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1

  7.7. Output Parameters Using the output parameters, current and voltage can be configured individually for each channel. These parameters should only be applied carefully meeting the specifications of the connected LED il

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1

  Apply and store the settings by pressing the button Send & Save which applies and stores the settings to the strobe controller. Further information on the configuration interface can be found in the following Chapter 7 -

• SMARTEK Vision | User Manual – LED Strobe Controller Family | Doc. v2.1.1

  2.4.2. Dimensions of HPSC4 Figure 6: Dimensions of HPSC4 in mm 105 130 44,94 118,40 124 27 70 6,40