Sony SLV-SE310 Manuals

Video Cassette Recorder Sony Corporation © 2001 Quick Start Guide 3-065-679-11 (1) GB This Quick Start Guide will introduce you to the essential procedures for using your VCR. Use the Auto Set Up function to preset all of the receivable channels. Then follow the additional steps in the Operating Instructions to change the programme position to your favourite order. 1 Unpacking 2 Inserting the batteries 3 Connecting the VCR 4 Using the Auto Set Up function 5 Tuning your TV to the VCR 1 Unpacking Check that you have received the following items with the VCR: 2 Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into the position. 3 Connecting the VCR 1 Connect the aerial to AERIAL IN of the VCR. 2 Connect AERIAL OUT to the aerial input of your TV using the supplied aerial cable. 3 For better picture and sound, connect LINE-1 (TV) to your TV using a Scart cable if your TV has a Scart (EURO-AV) connector. 4 Connect the mains lead to the mains. 4 Using the Auto Set Up function You can preset channels. Hold down AUTO SET UP for three seconds. When all of the receivable channels are preset, “SET UP” disappears from the display window. You can rearrange the programme positions to your favourite order (see “Changing/ disabling programme positions” in the Operating Instructions). Dew caution If the VCR is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the VCR, or when you move it from a cold to a warm location, wait for about three hours before operating the VCR. • Remote commander • Aerial cable • R6 (size AA) AERIAL IN AERIAL OUT : Signal flow iLINE-1 (TV) 2 3 4 1 AUTO SET UP VCR’s display window

SERVICE MANUAL AEP Model SLV-SE310D/SE510B/D/SE510D UK Model SLV-SE310I East European Model Russian Model SLV-SE410K/SE510K VIDEO CASSETTE RECORDER SPECIFICATIONS Photo: SLV-SE510 – Continued on next page – S MECHANISM SLV-SE310/SE410/SE510 RMT-V257B/V257C The abbreviations of SE310/SE410/SE510 contained in this service manual are indicated when these models are common to all their corresponding models as given below. SE310D SE310I SE410K SE510B SE510D SE510K SE310 SE410 SE510 Abbreviated models name All model names SLV- System Channel coverage P SLV-SE410K/SE510K AL (B/G, D/K) VHF E2–E12, R1–R12 UHF E21–E69, R21–R69 SLV-SE310D/SE510D SLV-SE510B CATV S1–S41, S01–S05 RF output signal UHF channels 21–69 Aerial out 75-ohm asymmetrical aerial socket Tape speed SP: PAL/MESECAM 23 SECAM 23.39 mm/s (recording/playback) SECAM 11.70 mm/s (recording/playback) .39 mm/s (recording/playback) NTSC 33.35 mm/s (playback only) LP: PAL/MESECAM 11.70 mm/s (recording/playback) NTSC 16.67 mm/s (playback only) EP: NTSC 11.12 mm/s (playback only) PA SLV-SE310I PAL (I) VHF IA to IJ, SA10 to SA13 UHF B21 to B69 CATV S01 to S05, S1 to S20 HYPER S21 to S41 L (B/G) VHF E2 to E12 VHF Italian channel A to H UHF E21 to E69 CATV S01 to S05, S1 to S2 0 H SECAM (L): VHF F2 to F10 UHF F21 to F69 CATV B to Q HYPER S21 to S41 PAL (B/G) : VHF E2 to E12 VHF Italian channel A to H UHF E21 to E69 CATV S01 to S05, S1 to S20 HYPER S21 to S41 YPER S21 to S41 • Refer to the SERVICE MANUAL of VHS MECHANICAL ADJUSTMENTS VI for MECHANICAL ADJUSTMENTS. (9-921-647-11)