Sun Microsystems 2000E Manuals
Sun Microsystems 2000E Installation manual (54 pages)
- Identifier: id-621960
- Brand: Sun Microsystems
- Device: Power Supply
- Type: Installation manual, PDF
- Key Aspects: Practical Advice for Users, Installation Case Studies
- UPD Date: 09.04.2026
- Source File: 616479.pdf
- Pages: 54
- Description: Operation instructions for the Sun Microsystems 2000E. This manual provides guidance on system configuration, user settings, maintenance guidelines, configuration options.
Key Pages and Contents:
-
A.2.3 Vented Front Panel
o Place the panel against the chassis with ball studs aligned with catches on the panel. At both ends, tap or press the panel into place. A.2.4 Side Panels 1. Place the panel against the cabinet so the notches on the panel inside align with tabs at the chassis t -
SPARCserver 2000E Power Supply Installation Manual—April 1995
2 d. Place the breaker box against power supply cage. Align the captive screws with the bottom two holes in the top power supply. See Figure 2-16. e. Loosely thread the two captive screws at the top of the breaker box into holes in -
A.1 Removal Procedures
Remove panels to afford access to the power supplies and related components. A.1.1 Opening the Hinged Door 1. Grasp the door at the upper-right corner and pull towards you firmly. See Figure 1-1. The door is secured closed by clips and ball-studs at the side oppos -
We welcome your comments and suggestions to help improve this manual. Please let us
know what you think about the SPARCserver 2000E Power Supply Installation Manual, part number 802-2700-10. I The procedures were well documented. Strongly Strongly Not Agree Agree Disagree Disagree Ap