Sunstream FL10 Manuals

Sunstream FL10 Assembly and installation instructions manual (13 pages)

• Identifier: id-2045153
• Brand: Sunstream
• Device: Boating Equipment
• Type: Assembly and installation instructions manual, PDF
• Key Aspects: Visual Flowcharts for Troubleshooting, Installation Video Links
• UPD Date: 02.08.2026
• Source File: 2242704.pdf
• Pages: 13
• Description: Maintenance instructions for the Sunstream FL10. The document offers guidance on software installation, performance optimization, software configuration.

Key Pages and Contents:

• ! NOTE Secure

  Powerpack: Damage due to substantial water intrusion or submergence is not warranted. Tighten all bolts. 7 Hydraulic Lines From either cylinder set

• ATTACH 19-000001-62 CLIPS

  HERE AND OTHER SIDE & SECURE. 9

• MOORING CONVERSION KIT

  Assembly Instructions ! NOTE Grease Pins with Marine Grease and apply anti-seize compound to all bolt threads before installing. ! CAUTION Only skilled individuals with proper tools should assemble the Mooring Mount System. Improper assembly may

• ! WARNING Failure to

  adequately cover exposed wires may cause a safety hazard and/or lift malfunction. Important Installation Instructions These instructions provide basic information about how to secure the FloatLift to a mooring buoy using Sunstream’s mooring buoy kit. Adhering to these

Sunstream FL10 Assembly and installation manual (22 pages)

• Identifier: id-1599535
• Brand: Sunstream
• Device: Boating Equipment
• Type: Assembly and installation manual, PDF
• Key Aspects: Safety Recommendations, Recommendations for Advanced Users
• UPD Date: 05.08.2026
• Source File: 1581177.pdf
• Pages: 22
• Description: Detailed operating instructions for the Sunstream FL10. The document elaborates on device functions and warranty information, troubleshooting guides, operational safety, internal layout.

Key Pages and Contents:

• PART NO. 690178 REV: C���

  10 Assembly Remove Guide-on caps from existing guide-ons. Install additional guide-ons and drop stop tubes down guide-ons. Set guide-ons to desired boat beam width. Bolt 3/8” X 3.00” Nylock 3/8” Guide-on Sleeve 6X 2X Install End Float Brack

• PART NO. 690178 REV: C���

  11 Assembly Align Telescoping Linkages with Guide-ons. Position Float Bracket an attach with Self Drilling Screws. If a 3/8” Nut Driver is not available, drill a 3/16” hole and install with 3/8” socket wrench. Dimension reflects approxima

• PART NO. 690178 REV: C���

  21 Safety Instructions If you have any questions, please call your dealer, or Sunstream at (253-395-0500). Save These Instructions Your safety and the safety of others is very important. Proper use of the information in this manual will help avo

• PART NO. 690178 REV: C���

  14 Assemble and set Frame Attachment Tubes. 4X Insert caps on end of tubes. IMPORTANT: Set Adjustable Frame Attachment Tubes on Frame Brackets and position to desired location. Assembly Bolt, 5/16” X 3.50” Nylock, 5/16”