Sunstream FL15023 Manuals

Sunstream FL15023 Assembly manual (28 pages)

• Identifier: id-2247098
• Brand: Sunstream
• Device: Boating Equipment
• Type: Assembly manual, PDF
• Key Aspects: Performance Optimization Tips, Usage Tips for Various Functions
• UPD Date: 26.02.2026
• Source File: 2040534.pdf
• Pages: 28
• Description: Technical setup manual for the Sunstream FL15023. The manual highlights service contacts, software configuration, user preferences, network setup.

Key Pages and Contents:

• PAGE 4 OF 23

  690249

• BOLT, .375-16 X 3.00, HEX, SS

  12X NUT, .375-16, NYLOCK, SS 12-060000-22 12X 11 FORM NO. PAGE 15 OF 23 690249

• PAGE 5 OF 23

  690249

• WASHER, .750, SS

  13-120000-59 16X PIN, COTTER, .125 X 1.50, SS 14-020700-33 PIN, .750 X 4.48, SS, HIGH STRENGTH 14-121703-07 4X 6 8X FORM NO. PAGE 10 OF 23 690249

Sunstream FL15023 Operation and installation manual (15 pages)

• Identifier: id-2045151
• Brand: Sunstream
• Device: Boating Equipment
• Type: Operation and installation manual, PDF
• Key Aspects: Practical Usage Examples, System Limitations and Considerations
• UPD Date: 12.06.2026
• Source File: 2242706.pdf
• Pages: 15
• Description: Quick start guide for the Sunstream FL15023. It provides technical information on testing procedures, power management, error codes, device instructions.

Key Pages and Contents:

• ANY QUESTIONS, PLEASE CALL YOUR DEALER OR SUNSTREAM AT (888) 786-5438

  INSTALLATION INSTRUCTION AND DIAGRAMS FOLLOW. THESE INSTRUCTIONS AND DIAGRAMS INFORMATION ABOUT HOW TO SECURELY AND SAFELY INSTALL THE FLOAT LIFT. ADHERING TO THESE INSTRUCTIONS AND DIAGRAMS, HOWEVER, PROVIDES NO GU

• IF YOU HAVE ANY QUESTIONS, PLEASE CALL YOUR DEALER OR sUNSTREAM AT

  (888) 786-5438. SAVE THESE INSTRUCTIONS YOUR SAFETY AND THE SAFETY OF OTHERS IS VERY IMPORTANT. PROPER USE OF THE INFORMATION IN THIS MANUAL WILL HELP AVOID POTENTIAL HAZARDS THAT COULD CAUSE DAMAGE TO PORPERTY AND OR PERSONA

• PRIOR TO LAUNCH

  ENSURE ALL COTTER PINS ARE BENT AND SECURE. • ALL NUTS ARE TIGHT. • HYDRALIC HOSES ARE NEATLY WIRE-TIED TO FRAME AND ARE CLEAR FROM • PINCH POINTS. BATTERY TERMINALS AND ALL FITTINGS ARE TIGHT. • RESEVOIR SEAL-CAP IS REMOVED (UNDER BREATHER CAP). • ENSURE HYDRAULIC

• TO WARD OFF GALVANIC CORROSION, IT IS ESSENTIAL THAT *SACRIFICIAL* ZINCS

  ARE INSTALLED AND MAINTAINED ON YOUR LIFT. ZINC IS USED AS IT HAS A HIGHER VOLTAGE IN WATER SO CURRENT WILL BE MORE INCLINED TO FLOW FROM IT. THE ZINC BECOMES THE CORRODING ANODE, WHILE THE LIFT SERVES