Tekmar 541 Manuals

1 of 8 © 2005 W 541 - 06/05 W 541 06/05 tekmarNet®4 Thermostat 541 - Wiring Brochure Overview Information Brochure Choose controls to match application 1 Application Brochure Design your mechanical applications 2 Layout Brochure Rough-in wiring instructions 3 Wiring Brochure Wiring and installation of specific control 4 Job Record Record settings & wiring details for future reference 6 Data Brochure Control settings and sequence of operation 5 The following brochure describes how to wire the tekmar tekmarNet®4 (tN4) thermostat 541. The 541 has outputs for one heat stage. The 541 has inputs for one auxiliary sensor. The wiring of 541 thermostat is simple and cost effective. Table of Contents: Definitions .......................................................................2 Rough-In Wiring .............................................................2 Remove the Wiring Cover ..............................................3 Mounting the Thermostat ...............................................3 Wiring Symbols ...............................................................3 Electrical Drawings ......................................................3-5 Wiring the Thermostat ....................................................6 Troubleshooting the Wiring .............................................7 Testing the Wiring ...........................................................7 Technical Data ................................................................8 / tNt 541 541 One Stage Heat 993-01 Feb 2005 Lot 01 To isolate relay, cut jumper Auxiliary Sensor 1st Stage Heating DIP Switches tN4 Network 24 V (ac) Power