toscano VIGILEC Zero Plus Manuals

toscano VIGILEC Zero Plus Installation and operation (4 pages)

• Identifier: id-2296904
• Brand: toscano
• Device: Controller
• Type: Installation and operation, PDF
• Key Aspects: Maintenance Schedule, Limitations of the Device
• UPD Date: 07.08.2026
• Source File: 1990720.pdf
• Pages: 4
• Description: Maintenance and service manual for the toscano VIGILEC Zero Plus. This guide includes software installation, device features, installation procedures, configuration options.

Key Pages and Contents:

• The unit doesn’t work and the power-

  •� on light is off, even after connecting the supply voltage and selecting “AUTO” mode. Wrong input connection. •� Phase failure. •� Over-voltage supply. •� Connect accurately. •�

• WELLS & TANKS CONTROL

  1 PROBE 2 PROBES WITHOUT PROBES 0-120’ 0-120’ Wires must be isolated. The maximum length for probes wiring is 200 m and the minimum section is 0,5 mm². A CORRECT GROUND CONNECTION is essential

• INSTALLATION AND OPERATION

  Pump controller and protection for one pump Multicontrol Internal configuration MAN-0-AUT selector • MAN . It makes the di- rect running of the pump. The control module is not needed in this mode. In this case, we will have no pump protection. • 0 . S

• Wiring and adjustment

  External On/Off The EXTERNAL ON/OFF (“3” y “4”) terminal blocks can be connected to a remote control device like: radio control, pressure switch, float switch, irrigation controller, time switch or a power supply input from 6