Trek 8i Manuals

Trek 8i Owner's manual

Trek 8i Owner's manual (2 pages)

  • Identifier: id-299080
  • Brand: Trek
  • Device: Trek 8i Bicycle Accessories
  • Type: Owner's manual, PDF
  • Key Aspects: Installation Troubleshooting Guides, Alternative Usage Methods
  • UPD Date: 06.03.2026
  • Source File: 262469.pdf
  • Pages: 2
  • Description: Complete installation manual for the Trek 8i. It details operating modes and setup validation, interface navigation, operational guidelines, operational procedures.

Key Pages and Contents:

  • HiFi, GS, Plus,

    DLX, DLX GS (RP2) Pro, Carbon, Carbon Pro (RP23) HiFi Plus 29, DLX 29 (RP2) HiFi Pro 29(RP23) Travel (mm) 116 116 100 100 Stroke (mm) 50 50 50 50 Sag (%) 25 25 25 25 Sag (mm) 12 12 12 12 Rider (lbs / kg) Spring (psi) Rebound Spring (psi) Rebound Platform Number Setting …

  • 7, 8, 9** & TF 69er (RP2)

    TF 9.8 and 9.9 SSL (RP23) EX 7, 8, 9 (RP2) EX 9.0, 9.5 (RP23) Travel (mm) 90 90 120 120 Stroke (mm) 38 38 50 50 Sag (%) 25 25 25 25 Sag (mm) 10 10 12 12 Rider (lbs / kg) Spring (psi) Rebound Spring (psi) Rebound Platform Number Setting Spring (psi) Rebound …

Trek 8i Owner's manual

Trek 8i Owner's manual (10 pages)

  • Identifier: id-299073
  • Brand: Trek
  • Device: Trek 8i Bicycle
  • Type: Owner's manual, PDF
  • Key Aspects: Recovery Procedures After Failures, Usage Recommendations Under Different Conditions, FAQs on Warranty and Service
  • UPD Date: 05.04.2026
  • Source File: 262462.pdf
  • Pages: 10
  • Description: Technical guide for the Trek 8i. It offers guidance for setup and wiring diagrams, shutdown procedures, error codes.

Key Pages and Contents:

  • Safety and general guidelines............................... i

    Functions.............................................................. 1 Installation ........................................................ 2-3 Setting the computer ........................................ 4-7 6i, 8i ..... …

  • To set Clock

    1. Cycle Mode to CLK. 2. Hold Mode. 3. Cycle Set to 12 or 24 hour clock. 4. Push Mode to select clock. 5. Cycle Set to the hour. 6. Push Mode to select. 7. Cycle Set to the minute. 8. Push Mode to select. The computer returns to current speed. To Restart the trip modes The trip modes …

  • To set a custom wheel size

    1. Cycle Mode to TME. 2. Hold Set. The wheel selection icon appears in the upper left corner. 3. Cycle Set to your preferred wheel. 4. Cycle Mode to the four-digit number. 5. Press Set. 6. Cycle Mode to your preferred first digit value (see Table 3). Table 3- Wheel size …

  • Attaching the computer wire

    The computer wire is usually longer than needed. Extra wire length can be diverted by wrapping it around the brake housing prior to routing it down the fork blade or down tube (Figure 9). Make sure the computer wire is not pulled tight when the handlebar is turned all t …

Trek 8i Owner's manual

Trek 8i Owner's manual (27 pages)

  • Identifier: id-299076
  • Brand: Trek
  • Device: Trek 8i Bicycle
  • Type: Owner's manual, PDF
  • Key Aspects: User Operation Guidelines, Environmental Considerations, Installation Troubleshooting Tips
  • UPD Date: 23.05.2026
  • Source File: 262465.pdf
  • Pages: 27
  • Description: User reference guide for the Trek 8i. It outlines maintenance guidelines and maintenance schedule, specifications, usage recommendations, setup.

Key Pages and Contents:

  • Replacing the Battery

    4. Lift the battery cover, exposing the battery. Be careful to avoid losing the rubber O-ring seal. 5. Remove the old battery. It may be possible to shake the battery out. Otherwise, carefully pry the battery up with a thin tool or knife blade. 6. Insert the new battery with …

  • Table 1- Function abbreviations, names, and explanations

    Function Explanation CLOCK CLK TME Time of day Displays in hours and minutes, or stopwatch showing seconds. 12-hour with AM/PM or 24-hour format Highest reading: 23:59 (clock) or 23:59:59 (stopwatch) CLK …

  • Note: If you want to set a custom wheel size, go to page 24 now.

    3. Cycle Mode The Wheel Size changes. 4. Hold Set• to select. The computer returns to current speed. Easy setup (ReSet) To set 8i wheel size The 8i allows you to use two different wheel sizes. T …

  • 5. Cycle Mode

    The wheel size changes. 6. Hold Set• to select. The computer returns to current speed. To set the second wheel size, repeat the instructions, but select the other Wheel Select icon. To select the wheel for use 1. Cycle Mode to TRP 2. Hold the le …

Trek 8i Installation

Trek 8i Installation (2 pages)

  • Identifier: id-887859
  • Brand: Trek
  • Device: Trek 8i Bicycle Accessories
  • Type: Installation, PDF
  • Key Aspects: Guidelines for Regular Maintenance, Warranty and Service Information
  • UPD Date: 18.04.2026
  • Source File: 856699.pdf
  • Pages: 2
  • Description: Product usage manual for the Trek 8i. This reference includes startup procedures, product handling, device calibration, device safety checks.

Key Pages and Contents:

  • Please read this manual carefully and save it for future

    reference. If you do not understand the information in this manual, or you have a question about your Incite computer that this manual does not cover, consult your Trek dealer, or contact us at: Trek Bicycle Corporation Attn: Customer …

  • Figure 11- Buttons on the Incite 6i

    computer Mode Set Figure 13- Select wheel screen Figure 16- Removing battery cover Figure 17- The ‘cross’ on the battery points up Table 3- Custom wheel size codes 700 x 20 2086 26 x 1.5 2010 700 x 23 2096 26 x 1.90 2045 700 x 25 210 …

8i: Related Instructions

Manuals from Other Manufacturers

Trek Categories:

Bicycle Accessories Scooter Camera Accessories Water Pump