TypeS Plug & Glow Manuals

Instruction Manual PACKAGE CONTENTS ON / OFF Plug & GlowTM Smart Lighting Hub Controller 24” Hardwire Cables 36” Power Cable with 12V Power Adapter Automotive Smart Lighting Hub Controller TECHNICAL SPECIFICATIONS INSTALLATION Note the portion of strip that is cut-off is no longer usable. 12V DC 12V DC 12V DC 3M 3M 3M 3M 3M 3M • Choose your desired location. ( – see suggestions above) • Clean surface thoroughly with isopropyl alcohol. Dry completely. • Peel off the 3M™ tape backer and carefully apply to the desired area. Note: • For use with 12V power only • Suitable temperature for installation is 70°F (21°C) or above. • If needed LED strips can be cut – ONLY cut where scissors mark is shown. Working voltage: DC 12V Only Bluetooth distance: No obstacle 30ft Frequency band: 2.4GHZ Types of LED: 5050 SMD RGB Maximum LED: 20ft (total combined) Maximum amperage draw: 3A POWER Two Power options available 12V Plug-in power adapter 12V Hardwire 3A fuse 1) Select your desired power connection and connect to the Plug & GlowTM Smart Lighting Hub Controller 2) Connect LED strip with extension cable to the Smart Lighting Hub Controller. Use arrow indication to match the correct direction. b ON/OFF a Light will ONLY work when power arrows are aligned as shown above LED Strips Extension Cables Smart Lighting Hub Controller APP INSTALLATION • Install Smart Lighting APP on your Smart phone. Scan above QR code to find the compatible APP for iOS or Android. • Or you can search for the APP through the APP Store or Google Play by: • Once installed, open the APP and begin enjoying your Plug & Glow™ experience. b ba Scan to download APP Compatible with iPhone 4s & higher, iPad3, iPad Mini, iPad Air & higher, and iPod touch 5th Generation & higher. Requires iOS 7.0 or higher. Compatible with phones with Android™ 4.3 or higher. Note: not all Android™ phones are equipped with Bluetooth® Smart v4.0 required for this application. Scan to download APP WINPLUS TYPE S LED + - USING THE APP Cont.. A B C D E F USING THE APP Home Page Tap “Smart LED Hub” Icon to start APP will automatically pair to the Hub when both are powered on (including Bluetooth) and within 30ft